14

i bought a new hp pavillion dv6 series laptop. the laptop itself is fine but it has the new hp touchpad mouse which i absolutely hate. its such a stupid problem to have with a computer. the left and right mouse buttons are, themselves, part of of the touchpad, meaning that if i tap the buttons without actually pressing them down, it registers the same way as the mouse pad (the cursor moves, tap to click activates, etc.) .

This is a major annoyance because it prevents you from operating the mouse pad with anything more than a single finger; if for example I use my right hand index finger to move the cursor using the touch pad and rest my left hand index finger on the left mouse button for more efficient mouse-ing, the mouse will react as if im trying to use 2 fingers to move it and it will either just sit there or will spaz out. the only way this works is if i keep the finger that is resting on the mouse button absolutely still, which is very difficult and, therefore, very annoying.

Also, even if i do abide by the arbitrary new decree of single-finger mousepad operation, i still have a problem because when i press down on the left or right click buttons, the mouse moves slightly, what with the buttons also being part of the touch pad and all. this would not be that hard to avoid except that they decided to also make the buttons much harder to press down. now whenever i go to click something, i press hard on the mouse button, causing my finger to slightly move or roll or flatten out a bit, causing the cursor to move slightly, and causing me to click on something different.

what i would like to know is if there is anyway that i can disable the touch pad on the buttons. i have gone through all of the settings under the synaptics menus but i cannot find anything about this. did i miss something in one of the menus? if not, then are there any updated drivers that allow for toggling of this function?

5
  • 2
    Wow 4 long paragraphs..... I could summarize this question into one short paragraph.
    – Pacerier
    Nov 6, 2015 at 4:38
  • 2
    Same exact "feature" on Acer E5 laptop. Who thought this was a good idea?
    – user453441
    Feb 13, 2016 at 11:22
  • 1
    Yes, very annoying "feature". On Windows 10 I was able to go into Settings >>> Mouse & touchpad >>> Additional mouse options >>> ClickPad Settings >>> SmartSense >>> Settings (gear) >>> Advanced Filters and then manually adjust the area where pointing and tapping are restricted to in order to solve this issue. Dec 3, 2016 at 21:17
  • Does anyone have a solution for this (for an Acer E5)? The 'SmartSense' thing that Rob suggested only works the first few seconds on activating the touchpad (using the Elan driver). I need a more permanent solution!
    – LBogaardt
    Dec 10, 2016 at 13:55
  • Same feature on Dell Inspiron 5000 series. No good solution yet for Linux, but Windows 10 doesn't have the same problem. Jul 19, 2017 at 21:06

3 Answers 3

8

I have a DV7T and hate the clickpad too. I have searched for a windows driver with the ability to disable this section with no luck, so I thought of a mechanical way to block the bottom section of the touch pad. I taped a piece of silicone from a blackberry cell phone skin to the bottom of the clickpad. It is not pretty at the moment, but this is my first attempt and it seems to be working. I will be looking into other thinner materials that don't ativate the clickpad. I will post an update if I find somehting better.

1
  • 1
    Velcro/hook & loop tape is a good option for this, recommended here Sep 8, 2016 at 19:07
3

There is a known hack for this in Windows Vista/7 which I'm guessing your using which goes something like this.

  1. Make sure you have the latest Synaptic drivers installed for your HP model.
  2. Open the advanced Synaptic settings under the Device Settings tab in your Mouse settings and then clicking the Settings button on that tab.
  3. Find the Filter Activation Time settings under PalmCheck-Enhanced ACM > Advanced Filters and set it to zero seconds.
  4. Find the Starting Zone Size settings also under PalmCheck-Enhanced ACM > Advanced Filters.
  5. Change the starting zone so that the area with the mouse buttons is not included in the green shared area. This may take a bit of trial and error to get right.

Screenshot of Synaptics Starting Zone Size setting

Good luck!

1
  • I have the same window. But the list at the left has only "Overwiew" and " Buttons".
    – Elmue
    May 1, 2020 at 17:58
3

You can (with Ubuntu Gnome) go to System/Preferences/Mouse/Touchpad and disable/reduce some of the objectionable behavior. You can also enable the "tap disable zone" for a convenient way to disable and enable the touchpad when adding a wireless mouse

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .