0

I have the Flip Mino (the non-HD one). Lately I've noticed, that it takes a longer to transfer movies from the Flip to my computer.

For instance, it takes about 2 minutes to transfer 400MB or so. If you do the USB2 math, this is barely USB1.1. Btw, I've tried it on various computers with the same results.

So, I called their tech support, and of course, they tell me that this is reasonable. I've created a QuickTime movie showing the copy process. Can someone tell me if this is reasonable or not?

http://www.sqleffects.com/mystuff/FlipIsSlow.mov

2 Answers 2

1

It does sound like you're only getting a USB 1.1 connection rather than a USB 2.0 connection.

If you're using all the same equipment (Flip Mino, USB lead etc.) then it's difficult to suggest what might have changed.

Assuming you're using the same lead and that it's not damaged the only other thing I can think of is that it's down to the amount of charge left in the Flip battery. Have you tried the transfer with the Flip attached to the mains charger?

I know that digital cameras need to be powered when transferring.

1
  • It charges off the USB port. But the battery is at full. Nov 11, 2009 at 0:26
1

Just because some device says it is USB2 does not mean it can transfer at the full 480Mb/s, In fact, I have never seen any device do this - the fastest I have seen was a ultra high speed USB stick which had a read speed of around 24Mb/s.

I have two friends who have the Flip camera and have complained about slow transfer seed - all I can say is leave it running. I am sure it is a limitation of the device and not your computer.

3
  • What are you talking about? My external hard drive comes pretty darn close to the limit with the same USB connection. Nov 11, 2009 at 5:04
  • But yeah, assuming that on the inside of a Flip is a usb stick, then yes, you might be right. Nov 11, 2009 at 5:05
  • @AngryHacker - That is/was what I was talking about - the inside of a Flip camera is basically based on a memory stick... That being said, even using HD cam corders with hard drives, I have never been able to hit 480Mb/s. Nov 11, 2009 at 5:12

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .