This is really for the HP CP1210 series but nevertheless, it doesn't hurt trying. From Page 51 of the HP Manual:
Cartridge out override
An Order Supplies message appears when a print cartridge is nearing
the end of its life. A Replace Supplies message appears when the print
cartridge is depleted. To ensure optimal print quality, HP recommends
replacing a print cartridge when the Replace Supplies message appears.
Print-quality problems can occur when using a cartridge that is
depleted, resulting in waste of print media and toner from other
cartridges. Replacing a print cartridge when the Replace Supplies
message appears can prevent this waste.
The Cartridge out override
feature in the HP Color LaserJet CP1210 Series Toolbox allows the
product to continue using a print cartridge that has reached the
recommended replacement point.
You can enable or disable the Cartridge out override feature at any
time, and you do not have to reenable it when you install a new print
cartridge. When the Cartridge out override feature is turned on, the
product automatically continues printing when a print cartridge
reaches the recommended replacement level. A Replace Supplies Override
In Use message appears while a print cartridge is being used in
override mode. When you replace the print cartridge with a new supply,
the product deactivates the override mode until another print
cartridge reaches the recommended replacement level.
Enable or disable the Cartridge out override feature
- Open the HP Color LaserJet CP1210 Series Toolbox. See View HP Color LaserJet CP1210 Series Toolbox on page 43.
- Click the Device Settings folder, and then click the System Setup page.
- Next to Cartridge out override select On to enable the feature. Select Off to disable it.