I am facing this problem of IPv4 and IPv6 properties tabs greyed out and not able to change the settings of the same. I have tried many solutions given online such as netsh commands and antivirus and malware scans. I have also replaced tcpip.sys file from a healthy system.But the problem still exists. Please post the solution if anyone has.
-
Are you using cmd to find your IPv4 ? And IPv6 ?– AntpJun 6, 2015 at 9:03
-
nope I tried resetting IPv4 and IPv6 using netsh winsock reset and netsh interface ipv4 reset commands. There is a IP address thats why the ingternet is working but i cannot change or modify it using the properties tab of IPv4– SunnyJun 6, 2015 at 11:54
Add a comment
|
1 Answer
Using Registry
- Click Start, click Run, type regedit, and then press ENTER.
- Locate and then click the following registry :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network
- Right-click this key, click Export, and then save the file.
- Click the Network key again, and then delete the Config entry. The Config entry will be reconstructed when you restart the computer.
- Restart the computer. You may have to manually turn off the computer.