19

I have a new ASUS Zenbook UX305. OS: Windows 10 Home

I've figured out that my laptop wakes up from sleep during the night, so i reviewed the event viewer and found out that it happens about 3-4 times each night.

I searched the web, applying the following solutions:

  • Disabled Advanced Power Settings -> Sleep -> "Allow wake timers"
  • powercfg -lastwake shows the wake up trigger was the power button.
  • In the device manager, I disabled the "allow to wake up" feature of the mouse, "wake on lan" and "wake on pattern match" of the WAN adapter.
  • powercfg -devicequery wake_armed shows NONE.

And it still wakes up like a crying baby.

4

3 Answers 3

15

I found out that the laptop wakes up exactly 3 hours after I put it to sleep, so I googled again using this new piece of data.

Paradoxically, my laptop (and probably many other laptops) wakes up in order to hibernate, but for some reason the hibernation fails - resulting with the laptop "staying awake".

Solution

Right-click on the Start button and select "Power Options".

"Change when the computer sleeps" > "Change advanced power settings"

"Sleep" > "Hibernate after"

  • On battery: Never
  • Plugged in: Never

enter image description here

Source: eightforums.com

4
  • This is a workaround (not actually a solution). If you keep the PC sleeping for a prolonged time, it will drain the battery. Jul 13, 2016 at 5:51
  • 3
    @sancho.sReinstateMonicaCellio not at all. My laptop is not on battery when this happens so definitely solves a problem for me. Also, hibernation is disabled on my laptop so this setting should not be enabled anyway. May 25, 2020 at 15:33
  • @HansLøken - Good to know. May 25, 2020 at 20:11
  • 1
    I have a theory. I had Hibernate un-checked from the "Choose what the power buttons do" menu, so the system was not supposed to actually hibernate, but all of my "Sleep -> Hibernate After" options were set to 3 hours, and I saw the same symptoms as above. I just disabled Hibernate completely (powercfg /h off) so now "Sleep -> Hibernate After" is totally gone; hopefully, that stops the wee-hours wakeups.
    – James B
    Aug 10, 2020 at 16:45
2

Here's what I did:

First run:

powercfg /lastwake

This might give something like:

Wake History Count - 1
Wake History [0]
  Wake Source Count - 1
  Wake Source [0]
    Type: Device
    Instance Path: ACPI\ACPI000E\2&daba3ff&1
    Friendly Name:
    Description: ACPI Wake Alarm
    Manufacturer: (Standard system devices)

If you recognize device then you found the issue. In above case friendly name is missing so device is not recognizable but it seems that something capable of waking up the system did the trick (as opposed to faulty lid closer detection).

Run below command to see scheduled wake timers:

powercfg /waketimers

In my case this prints:

Timer set by [SERVICE] \Device\HarddiskVolume4\Windows\System32\svchost.exe (SystemEventsBroker) expires at 6:41:31 PM on 12/10/2019.
  Reason: Windows will execute 'NT TASK\Microsoft\Windows\UpdateOrchestrator\Backup Scan' scheduled task that requested waking the computer.

You can run Task Scheduler built-in to Windows, navigate to above path and see if this is problematic.

Next thing to try is simply disable devices that can wake up the computer. Run following:

powercfg -devicequery wake_armed

Typically devices such as NVIDIA USB Type-C Port Policy Controller, NVidia High Definition Audio etc might popup here. Go to Device Manager, find these devices under Sound, USB etc sections, look for "Wake" in their properties and disable it. Also, WiFi controllers have ability to wake up the system. You can disable that in Device Manager as well. Finally, in Power Settings, go to Sleep section and disable Allow wake timers setting.

1
  • 2
    I have the "NVIDIA USB Type-C Port Policy Controller" and I have unchecked the wake option, but it seems to reactivate itself after reboot. Is there any way you know of it make that change permanent?
    – KyleL
    May 12, 2020 at 11:29
0

The NVIDIA USB Type-C Port Policy Controller thing is troublesome. As you say it flicks itself back on after a reboot even if you uncheck "Allow this Device to wake the Computer".

You can work around it by making a batch file that runs on startup with the command "powercfg -devicedisablewake "NVIDIA USB Type-C Port Policy Controller". That will uncheck the box. Not the most elegant of solutions to be fair.

If you're don't use the Type C port on the video card you can uninstall the device entirely. However when you update the driver it will probably reinstall it.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .