Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have toshiba Satellite pro p300 25w. The multimeia keys (start, stop, fw, prev) are associated with Winamp, that works fine. I would like the start-multimedia button to start Winamp, now it starts Windows Media Player. I believe Toshiba calls them "Easy Keys".

share|improve this question

2 Answers 2

up vote 1 down vote accepted

You can use AutoHotKey to set those buttons up to whatever you want

Special Keys

If your keyboard or mouse has a key not listed above, you might still be able to make it a hotkey by using the following steps (requires Windows XP/2000/NT or later):

  1. Ensure that at least one script is running that is using the keyboard hook. You can tell if a script has the keyboard hook by opening its main window and selecting "View->Key history" from the menu bar.
  2. Double-click that script's tray icon to open its main window.
  3. Press one of the "mystery keys" on your keyboard.
  4. Select the menu item "View->Key history"
  5. Scroll down to the bottom of the page. Somewhere near the bottom are the key-down and key-up events for your key. NOTE: Some keys do not generate events and thus will not be visible here. If this is the case, you cannot directly make that particular key a hotkey because your keyboard driver or hardware handles it at a level too low for AutoHotkey to access. For possible solutions, see further below.
  6. If your key is detectible, make a note of the 3-digit hexadecimal value in the second column of the list (e.g. 159).
  7. To define this key as a hotkey, follow this example:

    SC159:: ; Replace 159 with your key's value. MsgBox, %A_ThisHotKey% was pressed. return

Reverse direction: To remap some other key to become a "mystery key", follow this example:

; Replace 159 with the value discovered above. Replace FF (if

needed) with the ; key's virtual key, which can be discovered in the first column of the Key History screen. #c::Send {vkFFsc159}

Alternate solutions: If your key or mouse button is not detectible by the Key History screen, one of the following might help:

Reconfigure the software that came with your mouse or keyboard (sometimes accessible in the Control Panel or Start Menu) to have the "mystery key" send some other keystroke. Such a keystroke can then be defined as a hotkey in a script. For example, if you configure a mystery key to send Control+F1, you can then indirectly make that key as a hotkey by using ^F1:: in a script.

Try DllCall: Support for Human Interface Devices. You can also try searching the forum for a keyword like RawInput*.

The following is a last resort and generally should be attempted only in desperation. This is because the chance of success is low and it may cause unwanted side-effects that are difficult to undo:

Disable or remove any extra software that came with your keyboard or mouse or change its driver to a more standard one such as the one built into the OS. This assumes there is such a driver for your particular keyboard or mouse and that you can live without the features provided by its custom driver and software.

share|improve this answer
    
It's a good solution, but I would prefer a more simple one. Since the stop, play, next and previous buttons can be configured to Winamp, I would expect that the start button also can be configured somewhere... –  Karsten Feb 3 '10 at 9:40

Make sure that winamp is your default media player. Not sure if you can set that in easy Keys, but try changing that in "Default Programs" in Windows.

share|improve this answer
    
That would solve the problem even better, I must have misread –  Ivo Flipse Feb 4 '10 at 22:45

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.