Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

These HDDs will be used mostly for backups and data-storage (pictures, movies) which aren't often read. The price difference is 1.5 Euros in the case of these two:

  • HDD Western Digital Caviar Green Power
    500GB, 7200rpm, 32MB, SATA2
  • HDD Western Digital Caviar SE16
    500GB, 7200rpm, 16MB, SATA2

The only difference is the buffer size (16MB vs. 32MB). Is the larger buffer size worth the extra money?

share|improve this question
add comment

3 Answers

up vote 8 down vote accepted

It really worths the extra money. Why :

when you try to access a content from hard disk , it takes time to find the content you need. buffer is made from good stuff with high speed access. So when you find a content, it will save them all to buffer through an algorithm .

Conclusion: It makes your HDD disk works faster :) especially with large contents :)

share|improve this answer
add comment

http://www.pcguide.com/ref/hdd/perf/perf/spec/otherCache-c.html

As memory prices have fallen into the "dirt cheap" range, drive manufacturers have realized that they can increase the size of their buffers at very little cost. Certainly nothing is lost in doing this; extra cache won't hurt performance; but neither does it greatly improve it. As a result, if interface transfer rate is the "reigning champion" of overrated performance specifications, then cache size is probably the "prime contender". Some people seem to think a 2 MB buffer makes a drive four times as fast as one with a 512 KB buffer! In fact, you'd be hard pressed to find even a 4% difference between them in most cases, all else being equal. Not surprisingly, both external transfer rate and cache size are overrated for the same reason: they apply to only a small percentage of transfers.

The cache size specification is of course a function of the drive's cache characteristics. Unfortunately, manufacturers rarely talk about any characteristics other than the cache's size.

spinning rust HDD performance is a complex thing (lately, determined more often than not by firmware optimizations) and cache size is not a silver bullet by any means.

Rotational speed is a much better predictor of drive performance in my experience: 5,400 rpm is slower than 7,200 rpm, which is slower than 10,000 rpm, which is slower than solid state. Even then there are (rare) exceptions.

That said, at such a low price difference, probably worth it.

share|improve this answer
    
I agree with this comment. I have seen a significant difference when using a WDC 5400 rpm drive vs. a 7200 rpm drive but no noticeable difference with two like speed drives using different cache size with drives running at the same spindle speed. –  jtreser Feb 12 '10 at 10:57
    
Agreed that at around $3(?) why not. Likewise agreed that there is very little difference in how fast it will go. More important is the spin speed. –  ssvarc Feb 12 '10 at 11:07
add comment

The buffer also saves wear and tear by reducing unnecessarily repetitious reads and writes. Buffer size affects speed and wear more in some apps than others, but any time the buffer is exceeded, you lose both performance and durability. That's why they are increasing it---win win situation.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.