Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

alt text

I've got an ASDL router at home, that is connected via ethernet to a wireless router. My wireless devices at home connect to my wireless network and get access the internet fine.

My Windows Home Server is connect to this same router via an Ethernet connection, but none of the remote features work over the internet.

If I cannot my WHS directly to the ADSL router, then it can see the internet and remote desktop, web server and all that jazz works, but the wireless devices I have on my home network can't see it.

I just don't know enough about networking to know how exactly and when a static route would do the trick or a change to the subnet.

What do I need to do in order to sort out my home network?

Wireless router
IP: 192.168.1.1
Subnet: 255.255.255.0
DHCP: Leave time forever, start IP 192.168.1.100, end IP 192.168.1.200
Firewall: Disabled

Wireless router: Port forwarding set-up 192.168.1.101 TCP+UDP 80 Website
192.168.1.101 TCP+UDP 443 website (secure)
192.168.1.101 TCP+UDP 3389 Remote access

Windows Home Server
IP: 192.168.1.101

Additional information
Attain IP Protocol : Dynamic IP connect
IP Address : 192.168.1.65
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.254
Primary DNS : 8.8.8.8 (Google)
Secondary DNS : 8.8.4.4

share|improve this question
1  
+1 for the diagram. Check the DHCP settings of the wireless router and the adsl router - and add that information to the question - I think it would help to resolve this. –  Shaihi Feb 22 '10 at 14:03
    
Attempting to set-up wireless router as per this article: speedguide.net/read_articles.php?id=2556 –  Peter Bridger Feb 23 '10 at 22:44
add comment

7 Answers

Does the wireless router have a firewall built in?

If so then turn it off and see if you can connect, if you can turn it back on and add rules to the firewall to allow the ports you need to pass through the firewall. If you still cannot access the remote features of your WHS from outside then your problem is more advanced than my network skills sorry.

Hope it helps

share|improve this answer
    
Good question, I don't believe so - but I'll check (All the gear is in my 7 month on sons room, so it's hard to work on!) –  Peter Bridger Feb 23 '10 at 9:19
    
You might find this: articles.techrepublic.com.com/5100-10878_11-6089187.html article good. It has some illustrations to explain sub-netting –  Shaihi Feb 23 '10 at 16:47
add comment

Some routers have a DMZ setting, I have a NetGear and I have to set the DMZ server to the same IP address of the Home server, just ping the homeserver name from any machine to determine it.

share|improve this answer
add comment

I am not totally sure If I understand correctly, are you saying that you can not access the server remotely once connected to the wireless router?

If that is the case then I would assume that the router has some firewall rules or similar that you would need to consider for allowing traffic in to the server from outside?

Hope that helps

share|improve this answer
add comment

Please add the IP Addresses of your devices and there Gateway/ DNS Addresses to the diagram. I think you see then where your problem is ;)

share|improve this answer
    
I will do this once I'm able to access the router(s). The trouble is all the kit is in my 7 month old son's room, so it restricts when I can access it! –  Peter Bridger Feb 23 '10 at 9:22
    
First things first. Your Windows Home Server has a static IP from the DHCP Pool. This might bee a problem. Second you should look that you only have one DHCP server active. Lastly do the DHCP server publish a valid network config? DNS1 and Gatway should bee the IP of your ADSL Router! –  zzeroo Feb 25 '10 at 6:16
add comment

Make sure it's on the same subnet. Make sure it has a valid route / default route. Make sure the firewall isn't preventing access.

share|improve this answer
    
I think this is part of the problem, but I just haven't got my head round subnets. I read the Wiki article on it, but came out even more confused. Is there a good tutorial you can recommend for me? –  Peter Bridger Feb 23 '10 at 9:21
add comment

I'm going to guess that you mean the Internet can't see your WHS, not that your WHS can't see the Internet (if you Remote Desktop into the WHS, can you access web pages?). If so, you need to look up Port Forwarding for your router(s) if WHS can't use uPnP to set it up automatically. If your router works with uPnP, I believe WHS will set up ports 80, 443, and 4125 to forward.

share|improve this answer
    
When I connected my WHS directly to the ADSL router it did use uPnP to configurate the ports it needed. However looking at the admin, it doesn't seem to tell me what it's done. –  Peter Bridger Feb 23 '10 at 9:20
    
Since you've got two routers in the way, you might be able to let uPnP configure the wireless router and manually set up port forwarding from the ADSL router. But the problem is having two routers in a row -- can you set the wireless router to act as an 'access point' instead of a router? That would make it essentially a switch, and the ADSL router would then be 'directly' connected to WHS. –  Andrew Coleson Feb 23 '10 at 16:11
add comment
up vote 0 down vote accepted

As per the guide here: http://superuser.com/questions/111984/why-cant-my-windows-home-server-see-the-internet

I've disabled DHCP on the wireless router and given it a static IP address outside of the DHCP range of the ADSL router.

Now everything is happy and using the ADSL router as the DHCP server :)

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.