Entering Safe Mode problem

Question

When i start my pc i get following message:

The Logon User Interface DLL RtlGina2.dll failed to load

I found solution here

But i ca not log into my pc, neither in safe/normal mode. It is interesting that first time i succeed loging into safe mode, but change msconfig boot.ini to safemode with networking where i can not log in. And now every time no matter what i am choosing from F8 menu, i enter in safe mode with networking(where i get following error). So is it any way to log in back into "pure" safe mode. I am not sure that the question it`s clear enough ;-(

Answer 1

If u have ur windows XP installation disk

1. Boot into disk
2. Run repair install

XP Repair install

Please read carefully and make sure you followed the warning links before initiating the Repair Install. You can print a text version for reference. repair.txt

Boot the computer using the XP CD. You may need to change the boot order in the system BIOS so the CD boots before the hard drive. Check your system documentation for steps to access the BIOS and change the boot order. When you see the "Welcome To Setup" screen, you will see the options below This portion of the Setup program prepares Microsoft Windows XP to run on your computer:

To setup Windows XP now, press ENTER.

To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.

Press Enter to start the Windows Setup. Do Not choose "To repair a Windows XP installation using the Recovery Console, press R", (you Do Not want to load Recovery Console). I repeat, Do Not choose "To repair a Windows XP installation using the Recovery Console, press R". Accept the License Agreement and Windows will search for existing Windows installations. Select the XP installation you want to repair from the list and press R to start the repair. If Repair is not one of the options, END setup. After the reboot read Warning#2! Setup will copy the necessary files to the hard drive and reboot. Do not press any key to boot from CD when the message appears. Setup will continue as if it were doing a clean install, but your applications and settings will remain intact.

http://www.michaelstevenstech.com/XPrepairinstall.htm