Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I'm curious to know how stand-alone tablets work, in particular how tablet pens work. How do they tell when they're being tapped without any batteries?

share|improve this question
    
Tablet as a standalone input device, not a tablet-computer (touch screen), right? –  Arjan Jul 24 '09 at 14:11
    
I was wondering the exact same thing! –  Frank V Jul 24 '09 at 14:27
    
Correct. ()()() –  RCIX Jul 25 '09 at 10:41
add comment

3 Answers

up vote 5 down vote accepted

The pens often don't do much, in some cases they are just plastic. It is the tablett which does the work there are various ways that they can tell where they are being tapped.

Quoting from wikipedia

Passive tablets

Passive tablets, most notably those by Wacom, make use of electromagnetic induction technology, where the horizontal and vertical wires of the tablet operate as both transmitting and receiving coils (as opposed to the wires of the RAND Tablet which only transmit). The tablet generates an electromagnetic signal, which is received by the LC circuit in the stylus. The wires in the tablet then change to a receiving mode and read the signal generated by the stylus. Modern arrangements also provide pressure sensitivity and one or more switches (similar to the buttons on a mouse), with the electronics for this information present in the stylus itself, not the tablet. On older tablets, changing the pressure on the stylus nib or pressing a switch changed the properties of the LC circuit, affecting the signal generated by the pen, which modern ones often encode into the signal as a digital data stream. By using electromagnetic signals, the tablet is able to sense the stylus position without the stylus having to even touch the surface, and powering the pen with this signal means that devices used with the tablet never need batteries. Wacom's patents don't permit their competitors to employ such techniques.

Active tablets

Active tablets differ in that the stylus used contains self-powered electronics that generate and transmit a signal to the tablet. These styli rely on an internal battery rather than the tablet for their power, resulting in a bulkier stylus. Eliminating the need to power the pen means that such tablets may listen for pen signals constantly, as they do not have to alternate between transmit and receive modes, which can result in less jitter.

Optical tablets

Optical tablets operate by a very small digital camera in the stylus, and then doing pattern matching on the image of the paper. The most successful example is the technology developed by Anoto.

Acoustic tablets

Early models were described as spark tablets -- a small sound generator was mounted in the stylus, and the acoustic signal picked up by two microphones placed near the writing surface. Some modern designs are able to read positions in three dimensions.

Electromagnetic tablets

Wacom's are one example of a graphics tablet that works by generating and detecting an electromagnetic signal: in the Wacom design, the signal is generated by the pen, and detected by a grid of wires in the tablet. Other designs such as those by Pencept generate a signal in the grid of wires in the tablet, and detect it in the pen.

Capacitative tablets

have also been designed to use an electrostatic or capacitative signal. Scriptel's designs are one example of a high-performance tablet detecting an electrostatic signal. Unlike the type of capacitative design used for touchscreens, the Scriptel design is able to detect the position of the pen while it is in proximity to, or hovering above, the tablet.

share|improve this answer
    
My conclusion after reading the Wikipedia excerpt (and after using mostly Wacom tablets, but some others as well) is that most often the pens do a lot. They measure how much pressure is applied, which tip is used (the pen or the eraser), and if any button is pressed. (But of course the tablets also do their part.) –  Arjan Jul 24 '09 at 14:19
    
Answered all my questions and then some! thanks! of course, this means that there probably isn't going to be a tablet "pen" i can strap to my finger anytime soon... :( –  RCIX Jul 25 '09 at 10:44
    
That would be a touchpad, wouldn't it? No need for any pen then. –  Arjan Jul 25 '09 at 10:54
    
But i've never seen a touchpad over say 2 inches have you? –  RCIX Jul 26 '09 at 1:17
add comment

The pen doesn't usually require power. The screen is what detects if pressure is applied.

For more information, visit How do touch-screen monitors know where you're touching?.

You could also use your finger instead of the pen; Neither one of them needing to the "powered" by batteries.

share|improve this answer
1  
For tablets (not screens) it's most often the pen that recognizes the click. –  Arjan Jul 24 '09 at 13:56
    
For Wacom tablets (which are probably the most-used ones) it is actually the pen that registers pressure. It gets power by induction from the tablet/screen itself. –  Јοеу Jul 24 '09 at 14:05
    
I see. Maybe the question should be more clear? After reading the question, I was curious what was considered a "tablet" so I looked it up and most seemed to be using an untethered pen-like stylus. –  Travis Jul 24 '09 at 14:17
add comment

Most tablet pcs use Wacom pens and screen overlays. Which use an electromagnetic induction method to power and detect the position of the pen. Wacom tablets have a very high dpi (>1000) compared to the screens on touch phones or pda's which use conventional touch screen technology and have a substatially lower dpi.

What is the electromagnetic induction method?

This method refers to the patented pen input and tablet technology, the only one of its kind in the world which enables battery-free and cordless input operation. (Mechanism) The tablet forms a magnetic field on its surface (electromagnetic field), in which the electronic pen moves. When it moves, electricity runs through the coil inside the pen. The tablet then receives inductive signals generated by the magnetic field formed on the pen side (induction). By repeating the process a number of times in a short time, the pen's paths are smoothly read by the tablet. The electronic pen is capable of detecting the force exerted on it and the tilted angle, thereby enabling differences in line widths and color gradation to be displayed. Another notable feature is that an eraser can be added to the pen.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.