Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

What are the minimum system requirements to be able to run Gentoo Linux effectively?

share|improve this question
Intel E6600 (oc at 3GHz) seems fast enough even today. 4GB of RAM is a must. The faster your drives, the better. A person I talked to in the past ran Gentoo on a Pentium 3 with 700MHz, and it took them about a day to compile KDE 3. I would not call that effective. –  Ярослав Рахматуллин Nov 30 '12 at 4:47

5 Answers 5

up vote 3 down vote accepted

Gentoo compiles all the packages upon installing. That means fast processor and at least 512 megs of memory, to get reasonable compile times. Otherwise your installs will be very long and bring your system to a crawl.

It should however be noted that you can configure your installation to compile the packages on another computer that you set up for it, allowing you to use extremely old hardware if you have a server in your network. A similar approach is used to run Gentoo on Raspberry Pi...

share|improve this answer
"Fast" is very relative. Could you be a little more specific? –  Sasha Chedygov Jul 30 '09 at 7:21
They say that you need at least 486 gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=2 –  Alex Bolotov Jul 30 '09 at 20:23
distcc could quite effectively mitigate that compile time. The sheer range of configurations makes it hard to pin down true system requirements. X + Blackbox would probably run effectively on an original Pentium. –  Adam Luchjenbroers Dec 30 '09 at 12:28
Have used it as server with PIII 500 Mhz, a month worth of updates usually compiles in some 3 hours. And that is with very little software installed. I would recommend at least dual core 2+ Ghz for desktop usage. Updating KDE takes about 10-15 hours on my single core 1.8 GHz CPU. –  extropy Jun 8 '10 at 6:48
Added a paragraph which could be interesting for people that if you have multiple machines. –  Tom Wijsman Aug 18 '12 at 21:43

I've run Gentoo (fairly recently) on a Pentium 233MHz with only 64MB of RAM. Nothing was fast, and it was vital that there was some swap space since nearly every compile would use up all of the system's memory, but it did work. I can't recommend it, but I would say Gentoo will run on just about any machine.

A much better way to do this would likely be to use a faster machine and distcc to help the compiling process.

share|improve this answer
distcc is wonderful for low-powered machines. –  kwutchak Aug 7 '09 at 2:46

Pretty much just having a computer will let you run Gentoo. Lol.

But seriously, it depends on what you want to do. You should ask yourself what WM/DE you are going to use, what programs you want to use, if you want to watch HD videos, etc. If you install Gentoo using the automated kernel configurer (can't remember what it's called), then install KDE, Firefox3 with 300 plugins, etc., it's gonna be slow unless you have a fast computer. However, if you install Gentoo, customize the kernel, use a WM like openbox or fluxbox, use very lightweight programs in general, then it will be fast.

Hope that helps. You may want to be a bit more specific on what exactly you want to use the computer for to get better specs.

share|improve this answer
the automated kernel configurer is called "genkernel" (gentoo.org/doc/en/genkernel.xml) –  cd1 Jan 25 '10 at 16:31
genkernel actually allows you to customize the kernel. –  qdot Mar 1 '12 at 21:31

The fewer and smaller software packages you have on the system, the less powerful does the hardware have to be in order to compile updated packages from time to time. An old pc 300MHz Pentium-II with 256MB RAM and 6GB disk is fine if you install and run just the bare OS + a non-graphic firewall software package + just the extra packages you need in order to administer the machine (like Gnu screen etc) but with NO X-windows or desktep environment. Of course, it is worth mentioning that it takes about a day to compile gcc on such hardware, but I don't know if that really is a problem.

If you were considering running Gnome + Firefox + OpenOffice, then you would need a better machine, probably with 512 to 1024 MB RAM (and of course a far better CPU).

Hope this helps.

share|improve this answer

Kind of a 'tongue in the cheek' answer is 486 and 160MB RAM.

Why 160MB RAM? Because I couldn't squeeze emerge into less one day playing with xen and zram.

Why 486? Because I got it to run on one (with 128MB RAM, and in 2008), Gentoo is probably the best distribution for really optimized but still easy to manage systems.

What that 486 did? Not much more but a DAQ and printer controller.

share|improve this answer
Also, I doubt modern glibc would launch on 386. –  qdot Mar 1 '12 at 21:34

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.