Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

This question already has an answer here:

I have an older LCD monitor, and it has recently developed a single green pixel that's always on. It's not really annoying if the screen is bright, but it's very noticeable when there's something dark on the screen.

Is there any way to fix this?

share|improve this question

marked as duplicate by fixer1234, DavidPostill, Kevin Panko, mdpc, Nifle Mar 17 '15 at 6:34

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

did any of this help with fixing that pixel? – pavsaund Jul 30 '09 at 8:46
I ran jScreenFix and it seems to have fixed one pixel, but there's still another one lit - but it is a lot less noticeable now. I was actually surprised that it did anything. – chris Jul 30 '09 at 12:03
dup:… – Kevin Panko Sep 9 '09 at 21:17
up vote 8 down vote accepted

JScreenFix might be worth a try.

Some references that discuss on pixel problems.

share|improve this answer
same links as mine.. ;) – pavsaund Jul 25 '09 at 19:54
+1, useful resources. While not all stuck/dead pixels can be fixed, these are certainly worth a try. – jtimberman Aug 4 '09 at 20:39

Your dead pixel might actually be a stuck pixel.

Wikipedia: Stuck pixels, unlike dead pixels, have been reported by LCD screen owners to disappear, and there are several popular methods purported to fix them,[9] such as gently rubbing the screen (in an attempt to reset the pixel), cycling the color value of the stuck pixel rapidly (in other words, flashing bright colors on the screen,) or simply tolerating the stuck pixel until it disappears (which can take anywhere from a day to years). While these methods can work on some stuck pixels others cannot be fixed by the above methods. Also some stuck pixels will reappear after being fixed if the screen is left off for several hours.

Either way, it seems like there are several possible techniques you could try to fix this.

  • Pressure method
  • Tapping method
  • Heat method

This howto shows these techniques step by step and has a good explanation of the process. Hope one of these techniques can help out

There are several several software-tools you could use to remedy this as well.

share|improve this answer

you can try to re-seat the edge connector to the LCD display if you dare take it apart. The prognosis is not good however. In many cases there is no way to fix this kind of a problem, but sometimes you get lucky. So don't be afraid to try if you are comfortable with this level of complicated dis-assembly and re-assembly.

share|improve this answer
roll the disclaimer... ;) – pavsaund Jul 25 '09 at 17:58
That might affect a whole row or column on some simple LCD panels that aren't multiplexed, but I seriously doubt you can do anything at all about a single dead pixel on any LCD or multiple ones on those with a higher-level interface. – Dennis Williamson Jul 25 '09 at 18:09

I've read if you "knead" the pixel when you turn on the monitor, sometimes its wake up the pixel.. But i have two dead pix on my screen and a lot of massages after... They are still dead...

share|improve this answer
i've heard this too, but i believe this just has to be tried out – pavsaund Jul 25 '09 at 18:20

Not the answer you're looking for? Browse other questions tagged or ask your own question.