Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

My gaming PC has decided to die, it's not the first time but usually a quick ATX reset brings it back to life. Today it didn't.

I disconnect all unessasary devices so I've only got the case button / LED cables, GPU, CPU, RAM and power connected, the computer still didn't turn on.

I've not got a speaker on my motherboard so found a spare one I have for testing and when the machine starts up I get one long beep and two short beeps from my Award BIOS, which apparently means a video card error. I change it with the GPU from another machine and all works well.

Q: So I have a faulty graphics card (an nVidia 8800GT OC), is there anything I can try to resurect it?


So I tried the answer sblair provided, and bugger me it's only gone and worked! I pre-heated my oven at 200*C for about 5 minutes, put the graphics card in for about 5 minutes before cranking it up to 230*C for the remaining 5 minutes.

I didn't notice any plastics warping, bending, softening etc, however the 8 or so RAM chips did appear to sweat a bit, but this could be the residue from the thermal pads that I removed before.

I couldn't be bothered to put the fan back on just to test it, so I slapped the card back in it's PCI-e bay and this time got the normal, single BIOS beep... WOOHOO!!!

I did put the card on a bit of thick cardboard, didn't want to ruin any of my favourite pizza trays. I decided to use cardboard without a design on it, as this was surely only going to melt / burn.

So there we have it, oven + broken gpu = happy ILMV + hours more fun on COD:MF2


So I managed this cycle three times before the GPU finally died, still squeezed a few months out of it but the thing finally surcomed to the power of my oven :P, still pretty happy though

share|improve this question
Bizzare, but kinda cool. – Tom Apr 13 '10 at 15:32
up vote 14 down vote accepted

If you are feeling adventurous, you could try putting it in the oven. I believe the theory is that micro-fractures in the soldering (which might be the cause of the failure) can be eliminated by re-melting the solder. Your mileage may vary...

share|improve this answer
That's an interesting thought, what about the plastic 6-pin power connector, surely this would melt too? – Ben Everard Apr 11 '10 at 14:01
@ILMV Yes that's a good point, but the photos in the thread show that the PCIe power connectors are still attached for the baking. If you search the thread for "plastic" then others have suggested that the plastic may soften, but not fully melt at ~200deg C (………) – sblair Apr 11 '10 at 21:11
WHAT! F***ING Oh my god, so my girlfriend is like "Get out this will never work", so I slapped it in the oven on 200*C for 10 minutes, stank the kitchen out and now it bloody works! If I could +1 you again I would... legend! – Ben Everard Apr 12 '10 at 22:15
I'll +1 you for that. – Joe Taylor Apr 13 '10 at 15:13
@ILMV - note that when this heat trick works, it's usually because there's a heat issue with the card and solder and it's likely to break again soon. You need to prepare yourself to replace that card. – Joel Coehoorn Sep 4 '10 at 2:31

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .