Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I need to run a (Tcl, or whatever) script on a remote Unix machine, from a (local) Windows command shell, and I want the stdout/stderr of the script to show up in the Windows CLI. The exit code would also be useful.

Is this possible using ssh (putty)? Or by any other means?

Thanks!

share|improve this question

4 Answers 4

This is the default for SSH. If you want to redirect output remotely, put the redirect symbol (typically ">") inside the command quotes.

For example:

ssh remote_host "ls > /tmp/file_on_remote_host.txt"

For saving output locally,

ssh remote_host "ls" > .\file_on_local_host.txt

To combine stderr remotely and save it and stdout locally,

ssh remote_host "ls 2>&1" > .\combined_output_on_local_host.txt
share|improve this answer
    
Is it possible to do this with putty.exe? I.e. work as a "normal" CLI program as opposed to the default, which is to emulate a terminal. –  Cristi Diaconescu Apr 13 '10 at 14:13
    
I have putty'ed into a Windows 2003 system and run command line, yes. The host had HP's version of SSH server installed in order to support their system administration tools. If you only have an SSH client than everything is running on the remote system. –  kmarsh Apr 13 '10 at 14:54
up vote 10 down vote accepted

What I was looking for is putty's side-kick, plink.exe. Unlike putty, which acts like a terminal emulator, plink acts like a normal (non-interactive) CLI program.

Using it, I could do this in cmd.exe and get the remote command output saved locally.

\> plink remote_host "ls -l" > log.txt

Best of all, this works for ssh as well as telnet !

Just for reference purposes, these are the available options:

PuTTY Link: command-line connection utility
Release 0.59
Usage: plink [options] [user@]host [command]
       ("host" can also be a PuTTY saved session name)
Options:
  -V        print version information and exit
  -pgpfp    print PGP key fingerprints and exit
  -v        show verbose messages
  -load sessname  Load settings from saved session
  -ssh -telnet -rlogin -raw
            force use of a particular protocol
  -P port   connect to specified port
  -l user   connect with specified username
  -batch    disable all interactive prompts
The following options only apply to SSH connections:
  -pw passw login with specified password
  -D [listen-IP:]listen-port
            Dynamic SOCKS-based port forwarding
  -L [listen-IP:]listen-port:host:port
            Forward local port to remote address
  -R [listen-IP:]listen-port:host:port
            Forward remote port to local address
  -X -x     enable / disable X11 forwarding
  -A -a     enable / disable agent forwarding
  -t -T     enable / disable pty allocation
  -1 -2     force use of particular protocol version
  -4 -6     force use of IPv4 or IPv6
  -C        enable compression
  -i key    private key file for authentication
  -noagent  disable use of Pageant
  -agent    enable use of Pageant
  -m file   read remote command(s) from file
  -s        remote command is an SSH subsystem (SSH-2 only)
  -N        don't start a shell/command (SSH-2 only)
  -nc host:port
            open tunnel in place of session (SSH-2 only)
share|improve this answer

Yes if you use the putty ssh client you will see any command line output your script will produce. To get the exit code after the script runs type:

echo $?
share|improve this answer

Other way to get the log file on your windows machine is : - mount Windows m/c on Unix system ( depending on flavor of UNIX, this could be possible using Samba server) - run the script from windows using any remote client - have the script log into the mounted directory

You can see the output live if you get unix equivalent of tail for Windows: (http://stackoverflow.com/questions/187587/looking-for-a-windows-equivalent-of-the-unix-tail-command)

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.