Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Hey, a few days ago my computer wouldn't boot..said something along the lines of "Please insert correct boot media and press any key" Its oldish so I tried what I could and just went out to buy new hard drive.

Yesterday, installed it and it worked fine. Put Windows XP onto it and installed SP3 etc, turned on today and the same thing has happened! Tried changing cables, remove graphics card etc, restoring BIOS to default but nothing works.

Motherboard: Asus A8R32-MVP Deluxe
Ram: 2GB
HDD: 320gb Hitachi

Any ideas?

Thanks :)

share|improve this question

4 Answers 4

Check your motherboard for bad caps. If you have good power and good cabling then the drive is bad.

Google Images http://images.google.com/images?q=bad%20caps

share|improve this answer

This is what happens when you put windows on a different model of hard drive from the one it was originally installed on. Booting to your installation disk and telling it to repair the installation will get you back up and running in a jiffy, best of luck to you!

share|improve this answer
    
When running Windows setup...I get "Windows cannot find any hard drives installed on the machine........." Thanks –  Elliott Apr 26 '10 at 18:43
    
This answer is not correct, based on Elliott's description of the problem. You can clone a hard drive onto a completely different model from a different manufacturer, without seeing the reported error. –  rob Apr 26 '10 at 19:28
    
That is not my experience... –  marcusw Apr 27 '10 at 2:13
    
@marcusw: The problem you're describing sounds different, like the boot loader was not installed when you installed the new hard drive. The only time that should happen is if you do a file-by-file copy or only clone the individual partitions (instead of a full disk clone), or if you also change your motherboard. But Elliott did a clean install on the new drive and everything was fine. Then the next day it failed again, even though he did not change any additional hardware. Windows installs the bootloader during installation, so something else must be wrong. –  rob Apr 27 '10 at 17:42

Is the hard drive detected in BIOS? Is it free of malware? Can you connect it to a different system as a secondary drive (or put in an external enclosure) to test the drive and scan for malware?

share|improve this answer
    
Its a brand new Hard Drive...I am using the one I bought yesterday, it worked fine now it doesnt. –  Elliott Apr 26 '10 at 19:03
    
Possibly it is bad as noted by others. It does happen. Possibly infected by something in the time it was working? –  Dave M Apr 26 '10 at 19:48

It sounds like your hard drive may be defective. Try running chkdsk or badblocks, as noted here: http://superuser.com/questions/66820/full-physical-hd-check/66930#66930

If chkdsk or badblocks doesn't report any bad blocks, it's still possible that the drive is failing and the bad block scan triggered sector reallocations. You can install SmartMonTools + GSmartControl to view the SMART attributes. Once both tools are installed, run GSmartControl, double-click on your hard drive, then click on the Attributes tab. In particular, check the value for Reallocated Sector Count--on a brand-new drive, the raw value should be 0.

share|improve this answer
    
I bought it from Pc World yesterday...it worked, now it doesnt? –  Elliott Apr 26 '10 at 19:18
    
I've had several brand-new hard drives come with bad blocks. I think if you run a bad block scan on your drive, it will either report bad blocks, or it will cause sectors to be reallocated, effectively hiding the bad blocks. A SMART diagnostics utility will tell you if the drive has reallocated sectors. –  rob Apr 26 '10 at 19:31
    
Tried this using live ubuntu disc and it doesnt pick it up? –  Elliott Apr 26 '10 at 19:54
    
edit...tried it in my computer (windows 7) and its found it..just scanning now. –  Elliott Apr 26 '10 at 20:03
    
This happened to me too: the same hard disk with different OSes was sometimes recognized and sometimes no. I thought that it was a matter of ATA vs SATA drivers: could it be? –  dag729 Apr 26 '10 at 20:11

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.