Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Thinking about maybe building my own NAS. I would go with Raid 5, and would like maybe about 6 SATA drives:

  • There a mini atx case that can hold this many drives (Non-Rack ideally)
  • What sort of power will I need?
  • Any way this won't be pretty loud?
share|improve this question
    
I would like to see an answer to this as well. I assume you mean 6 standard hard drives (not laptop drives)? –  James Watt Apr 28 '10 at 13:13
    
Ya, I was thinking 3.5 form factor –  Kyle Brandt Apr 28 '10 at 13:18
2  
1  
Or maybe silentpcreview.com/fractal-r2? –  Kyle Brandt Apr 28 '10 at 13:31
    
Related: Can someone suggest a mini-ITX motherboard that support 6 drives in a RAID? –  James Watt Apr 28 '10 at 14:46
add comment

closed as off topic by DMA57361 Sep 2 '11 at 14:08

Questions on Super User are expected to relate to computer software or computer hardware within the scope defined by the community. Consider editing the question or leaving comments for improvement if you believe the question can be reworded to fit within the scope. Read more about reopening questions here.If this question can be reworded to fit the rules in the help center, please edit the question.

5 Answers

I doubt it's what you're looking for, but most Mini-ITX boards will fit in a standard ATX case.
Most HD's pull around 10w+ each, so an normal Mini-ITX powersupply probably isn't going to cut it.

share|improve this answer
    
Actually the usual drives for home servers, LP models, take around 6.5W when seeking: silentpcreview.com/article1216-page5.html –  Zds Sep 2 '11 at 13:45
add comment

If you can do with 4: Chenbro ES34069. I've never seen a mini-ITX chassis hold more than 4.

Edit: I stand corrected. The Fractal case in the comment above looks awesome.

share|improve this answer
add comment

Have you seen Lian Li's PC-Q08?

share|improve this answer
    
I'm doing basically the same thing as soon as WHSv2 comes out and I've been frantically looking for workable boards and cases. Here are a couple boards I've been contemplating: ZOTAC NM10-DTX Atom/Ion, 6 SATA ports, 1 x16 slot, 1 x1 slot Sapphire IPC-AM3DD785G Only 4 SATA ports but AM3 socket so it will take an AMD Athlon II X4 605e 45W TDP proc. Zotac H55ITX-A-E 6 SATA port goodness, all the advantages of the LGA 1156 chipset, overly power hungry i3/i5 required. GIGABYTE GA-2AIEV-RH Only AM2+ but will supposedly still support the AM3 605e, 6 SATA ports, PCIe x16 slot but only supports x8. –  user35475 Apr 28 '10 at 22:06
    
Plenty of other differences, some have Native Wifi, some have add on wifi via a mini PCIe slot, some support DDR2 others DDR3, different onboard GFX, support for 5.1/7.1+1, etc. I'm looking ideally for a true AM3 board with full DDR3 support, 6+ (7+ really but I doubt that will ever happen) SATA ports, DTX would be nice with an x1 and an x16 slot, 7.1+ support for streaming audio through a wifi home audio setup, descent integrated GFX would be nice too. Of course I'll probably never get most of these things but I can dream can't I? –  user35475 Apr 28 '10 at 22:55
add comment

Even through some time has passed and you most likely already have a case I would recommend a Fractal Design Array R2 which I use for my Network Storage. It takes up to 6 3.5" devices and 1 2.5" device and just looks awesome.

share|improve this answer
add comment

If you are using picoPSU or similar, I recommend using low-power drives. Their performance is within striking distance from their 7200rpm counterparts, and their noise levels and power requirements are more modest. If you look at [table on this article], you can easily find LP drives that take 6.5W or less when seeking, compared to around 10W of 7200rpm drives.

share|improve this answer
add comment

Not the answer you're looking for? Browse other questions tagged or ask your own question.