Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I need to mount a VMWare disk image in Windows 7 64-Bit however the "VMware Mount Utility" only works on 32-Bit operating systems. Is there an application or method that I can use to mount the disk?

share|improve this question
1  
which version of vmware do you use? –  akira Jul 3 '10 at 7:06
    
vmware workstation 9.0.0 does have a vmware-mount.exe that support windows 7 64-bit in Vmware\Vmware Virtual Disk Development Kit\bin. –  Jichao Oct 20 '12 at 13:52

4 Answers 4

Unfortunately, 64-bit Windows will restrict the ability to load 32-bit drivers, which is why the VMDK mounting utility is failing.

I found this page that purports to be able to work around the problem by simply installing it in the Program Files directory instead of Program Files (x86), but it did not work for me; perhaps you will have better luck. You could also look for a third-party tool like vdk.exe, but alas, they too need to use a driver, which gets blocked—yes, even when installing/running as administrator (the source for VDK is available, so someone may take up the task of updating and compiling it for 64-bits). OSFMount actually has a 64-bit version, but unfortunately it only supports read-only for VMWare disks.

There are a few threads on the VMW boards about this and it seems that the old DiskMount (5.5) just doesn't support 64-bit Windows and that a newer one is included as part of the developer tools (as though only devs would need such a utility). So your options are to use the vmware-mount utility from either the VMWare VDDK or the newer vSphere VDDK which contain a more recent copy of the mounting and disk management utilities. (Even these install as 32-bit by default and include a zip file with 64-bit versions of a few of the files including the disk management utility, but not the mounting utility.) You can mount a VMDK file with this, but note that it mounts as read-only by default; for write capability, you must use the /m:w switch, and even then, Windows keeps giving a path not found error when trying to change/delete files on the mounted volume.

VMWarePlayer has a built-in mounting ability via the hard-drive settings, but again, even setting it to not—read-only gives errors about being unable to find the file. (VMWare Workstation also does this, but VMWare Player is much smaller and free.)

Update: I just discovered that you can make changes to drive mounted with vmware-mount (from the VDDK), if you do it from an admin command-prompt (e.g., e: & del /f /q pagefile.sys). However, when doing it this way, it does not even appear in Windows Explorer. You can try experimenting with different combinations of permissions and user privileges to find one that works best.

VMWare Player mounting command

enter image description here

share|improve this answer
1  
+1 for OSFMount –  adaptive Aug 15 '12 at 13:13
    
I'm using OSFMount to get read only access, and I'm now using testdisk to create an image.dd of the partition I need which OSFMount can give write access to, which will let me use testdisk to fix the partition structure so windows will recognize it so I can get to my stuff :D –  Logan Dam Aug 19 '13 at 12:33
    
Very nice. A few years ago I took an image of my Windows XP volume right after my Documents and Settings directory was somehow erased. It’s been using up 4GB all this time because I keep intending to restore the lost files from it “later”, but that means preparing a chunk of unused disk space to restore it to. Your idea to use OSFMount for this purpose is a good idea and I might finally be able to get it over with and free up the space. :-) –  Synetech Aug 19 '13 at 14:20

Install the trial of the newest VMware Workstation. It comes with a mount utility under File\Map virtual Disk which runs fine under Win7 x64

share|improve this answer
1  
Yikes! Downloading and installing hundreds of megabytes just for a single utility. :-( –  Synetech May 14 '12 at 22:25
    
Yep - however this works. You can also give the VDDK a try which was mentioned by Synetch, this should also work –  leepfrog May 14 '12 at 22:56

You might try installing the XP Mode. It can be installed as 32 bit in a 64 bit environment, then you could run VMWare in XP mode.

http://www.microsoft.com/windows/virtual-pc/download.aspx

share|improve this answer
4  
you idea is to put a virtual machine around a virtual machine to make things work? –  akira Jul 3 '10 at 7:06
1  
@akira The OP states he just needs to mount the disk, not actually run the VM its associated with. –  Stephen Jennings Jul 3 '10 at 7:12
    
@Stephen Jennings: yep, but i read "VMWARE in XP Mode" and not "VMWARE Mount Utility". –  akira Jul 3 '10 at 8:27
    
a virtual machine in a virtual machine would or fine if he wanted to actually run programs from re the virtual disc,otherwise just installing the vmware mount utility in xp mode would suffice. –  ubiquibacon Jul 5 '10 at 23:27

The other thing you can do is so easy step is:

  • Open the Vmware Player
  • if you have another VMX VM's like Windows Xp,Windows 7 then turn it off and go to its vmware settings
  • In Hardware Tab click on the button "Add" and Select HArdisk option Browse to the file where your "Vmdk" file exists.
  • Add it
  • When you turn on your VMX VM (whose settings you have changes and added the drive vmdk) then you will now able to find the other hard drive which is your vmdk file.

    Enjoy :)

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.