Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

If I open a command prompt on my machine and type ipconfig /all, I see lots of

Tunnel adapter Local Area Connection* 9:

   Media state . . . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Sufficx . . . :
   Description . . . . . . . . . . . . . : Microsoft 6to4 Adapter #5
   Physical address. . . . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . . . : Yes

In fact, they're so many that my "real" adapters are pushed out of the stack, and can't be seen anymore. Is there any flag I can use on ipconfig to hide all virtual interfaces? Or is there some other way around this problem?

Since they always say "Media disconnected" I suppose disabling could be an option, but if possible I'd rather not turn any functionality off. I just want to control what output I get from ipconfig.

Also, I know these are related to IPv6 stuff. However, most of what I find on google merely states what these are, and that they're harmless - nothing about hiding/removing them.

share|improve this question

2 Answers 2

up vote 1 down vote accepted

I don't know of any way of removing them from the list, but there are two workarounds. The first and easiest is to not use /all if you don't need it. If you absolutely need the extra information provided by /all, then the other option is to increases the number of buffered lines. This can be done by selecting the Layout tab in the properties for cmd. Simply set the vertical buffer to be larger (300-500 should suffice).

share|improve this answer
    
I certainly would have liked to remove inactive adapters (I just don't see the reason for having them lying around...) but increasing the buffer size to 500 rows did solve my immediate problem: not being able to see the real adapters. Thanks! –  Tomas Lycken Jun 7 '10 at 10:39
1  
Another option in addition to MBraedley's methods is to use the "ipconfig /all |more" command. It then pauses with each screen, giving you a chance to see what you want. –  bikefixxer Nov 16 '10 at 6:46

There's a tool at the bottom of this page that is supposed to do it.

The real fix is to disable ipv6. If you open Device Manager and have it show hidden devices, it shows all the tunnel adapters it has installed (the computer I'm fixing right now had over 500).

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.