Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I would like to create a windows xp guest from the windows xp upgrade cd I have, along with one of a few full versions I have around. However, when I reach the stage in the installer where I am prompted to insert a full version cd, the installer can't find it (update: I checked that this works for a normal install), i.e.:

Setup could not read the CD you inserted, or the CD is not a valid Windows CD..

Is there a work-around for this so I can mount both cd's, or mount a new cd during the install process?

I've tried various combinations of mounting .iso files and specifying disks, such as:

$sudo virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 
--disk ./vm/winxp_sp1.iso,device=cdrom  --disk ./vm/windows.qcow2,size=12 
--vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 -c /dev/cdrom 
--check-cpu

If I try to specify multiple cdrom drives, I receive an error:

virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 
--disk ./vm/winxp_sp1.iso,device=cdrom --disk /dev/cdrom,device=cdrom 
--disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows 
--os-variant winxp --vcpus 2 --check-cpu

Starting install...
ERROR    IDE CDROM must use 'hdc', but target in use.
share|improve this question
    
in the second command, is there already a mounted disk in /dev/cdrom perhaps? –  quack quixote May 31 '10 at 23:05
    
Probably, that was my attempt to mount two drives at once. I only have one physical cdrom drive, I'm not sure if I can mount the 2nd on at hdd etc. –  Dana the Sane May 31 '10 at 23:22
    
so you have the Windows installer CD saved on your system as two iso files?? this is not good news.... Can you merge these two iso's into one iso... there is hope for that if you know what your doing... otherwise I think Microsoft has you beat; they don't get Junior high students to do their programing any more :) –  Iceking007 Mar 7 '11 at 23:23
    
I don't own the full install disk for XP, just the upgrade. You can in stall from an upgrade cd, if you have a full install cd from a previous windows version, which is what I was attempting. –  Dana the Sane Mar 8 '11 at 15:42

1 Answer 1

virt-install does not appear to support multiple CD ROMs natively. Fortunately, there is a fairly direct way to get it to do so:

  1. Use virt-install to create the virtual machine with the first CD-ROM, in your case named xpsp1. Behind the scenes, libvirt will create an XML configuration file. Turn off the machine now (virsh destroy xpsp1); you were only interested in the XML file.

  2. Open the XML file, which is located in /etc/libvirt/qemu/ (e.g. /etc/libvirt/qemu/xpsp1.xml). Probably.

  3. Search for the string cdrom. This should lead you to a chunk with these values:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <source file='/path/to/vm/winxp_sp1.iso'/>
      <target dev='hdc' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='1' target='0' unit='0'/>
    </disk>
    
  4. Copy paste this block and change the settings for your second CD-ROM. Namely, you will need to change <source file=...> (path of your other file), <target dev=...> (to, e.g., hdd) and <address unit=... (to, e.g., 1)

  5. Restart the machine (virsh create /etc/libvirt/qemu/xpsp1.xml) and the two CDs should be recognized.

share|improve this answer
    
Sounds promising. The project I was working on is long gone but I'll keep this in mind. –  Dana the Sane Nov 19 '13 at 15:23

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.