Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I am looking for network simulator (subnets, routers,wireless etc..) to study for an interview that I have.

share|improve this question

5 Answers 5

up vote 6 down vote accepted

You could take a look at these:

GNS3

visual - netkit

OMNeT++

I've use d GNS3 in the past and it was pretty good, I haven't any personal experience with the other two.

share|improve this answer

NS2 is the open source standard, while Opnet is the commercial standard. NS2 is gradually being replaced by NS3.

I've used NS2 extensively (while working at Qualcomm) and it's very powerful. See also the entry on network simulation on wikipedia, which also lists these applications.

share|improve this answer
    
Highly recommended NS2. –  Diogo Jun 19 '11 at 14:48
    
+1 on NS2. The only draw back is TCL but even so, it is worth the effort. –  Sardathrion Aug 22 '11 at 11:50

There is also Packet Tracer from Cisco (latest version as of June 2010 is v5.3). It is free for Cisco student

enter image description here

share|improve this answer

My preference is Omnet++. I'll admit that I've not worked with NS2, but Omnet++ satisfied all my requirements for my PhD research.

Omnet is a very versatile simulator, but the versatility comes at the cost of added complexity. You should already be familiar with C++, and be prepared to write lots of it.

Omnet also contains a rich set if libraries that allow you to model wireless networks, GSM networks, vehicular ad-hoc networks or peer-to-peer networks to name a few.

share|improve this answer

from my own experience: 1- Packet tracer: is just for learning. they taught us when we were taking CCNA, and cisco materials. It is quite simple and GUI oriented.Normally, it a good idea to show that your know it and tell that it is simple.and it could serve the purpose of subnetting, routing, wireless, and so many things , but as I said , it is quite simple.

however, when you are talking about network simulators through which you can do your own modification, your can not use packet tracer, NS2, Omnet++,and NS3 should be your options. These simulators are so powerful and need some time to get it. My recommendation for a starter, Omnet++ has some good GUI basic modules, it allows you to learn simple things easily,refer to some basic tutorials and you could get started with your project within short time. NS2 or NS3 they are quite hard(in my opinion) and they do not tend to have GUI. To make it easy for you, i think you should go for omnet++ and here is the basic tutorial .

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.