Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

When I turn my iMac G5 on the brightness is always down and I have to turn it up every single time. I have looked all through System Preferences and I cannot find any setting related to this.

Is there some kind of hidden setting somewhere. If not, is it possible to change the brightness via Terminal so I can add it to an Automator script that runs at startup?

share|improve this question

1 Answer 1

up vote 1 down vote accepted

Resetting PRAM and NVRAM might be slove this issue

  1. Shut down the computer.
  2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
  3. Turn on the computer.
  4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
  5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
  6. Release the keys.

Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models.

Source : http://support.apple.com/kb/HT1379

OR

Boot from your Install Disk 1 and Repair fixes the brightness preferences.

http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1018.html

If not working any of above operation : This is answer :

From http://wiki.debian.org/iMacG5

Power Management: Hibernate, Standby, Screen Sleep, Screen Brightness. The iMac G5 uses System Management Unit (SMU) rather than the more common Power Management Unit (PMU) for its general power management. This is not well supported. Both suspend-to-disk (hibernate) and suspend-to-ram (standby) are not working; standby is unlikely to be possible at all, a hack for hibernate is in the early stages for the G5 processor (by Johannes Berg). I have not figured out any way to put the screen to sleep, and the screen brightness also doesn't seem to be configurable, which is annoying because the default screen brightness for the iMac revA (Nvidia) is set quite low.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.