Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I got a wireless modem that needs to plug into my computer in order for it to work.

Is it possible to hook up this computer to my wireless router so that other devices can connect using the same connection? (Effectively using my computer as a modem?)

If I try to share internet connection on LAN, my wireless router doesn't seem to pick up any connection details. I plugged RJ45 cable from my computer into the wireless routers WAN point.

share|improve this question
add comment

3 Answers

Plug your computer into the wireless router (in the WAN-port if you have one) using a regular UTP patch cable. Go to network connections and right click your LAN connection. Click properties and go to the tab called "Sharing". This window pops up:

Window

Make sure the top checkbox is checked, the bottom one is optional but I prefer and recommend leaving it unchecked. Connect to the internet using your USB modem, other network devices should now be able to connect through your computer.

share|improve this answer
    
Is this through my computer (ie ad-hoc wireless) or can I plug a cable from my computer to my wireless router? –  Makach Jun 18 '10 at 14:54
    
Plug a cable in your computer through the LAN connection and plug the other end of the cable in (the WAN-port of) the router. –  BloodPhilia Jun 18 '10 at 15:12
    
yes. I tried. I shared my LAN connection but my Wireless router isn't picking up any details from my computer (ip/dns/gateway) - im sure im missing a step? –  Makach Jun 18 '10 at 21:26
add comment
up vote 0 down vote accepted

The answer is "no" - unfortunately. It's not possible to bridge the dk 3 usb modem.

share|improve this answer
add comment

I successfully did something like this awhile back when I needed to share a wireless signal to other computers on the LAN network.

  • The RJ45 cable should go from your computer (which has the USB modem) to a LAN port on the wireless router.
  • On Windows XP, please bridge the connection between the USB Modem and the Local Area Connection.
  • On the router's webpage, disable the router to act as a DHCP server (it should be provided now by the computer)

If all is successful, when you go to a different computer and check the IP configuration, you should get a unique IP address with a gateway of the IP address of your first computer (with the USB modem).

Play around with some of the settings on the wireless router to get the configuration that works for you. Each router is unfortunately a little different.

share|improve this answer
    
Computer says "To create a Network Bridge , you must select atleast two high speed internet connections that are not being used by internet connection sharing." –  Makach Jun 19 '10 at 7:28
    
You'll need to take the internet connection sharing off of the computer. The bridge will, in effect, do the same thing. –  wbeard52 Jun 19 '10 at 16:21
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.