Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

my MacBook Pro hard drive died (after dropping) I can see the disk when I book from DVD but I don't want to format not to lose data.

What is the best way to recover data? (what hardware and software if any I need)

I have other IMac and Windows computers

share|improve this question

3 Answers 3

Hold down T and power on your Macbook Pro. This will boot it into target disk mode. From there, plug it into your iMac via FireWire cable and you'll be able to copy whatever you need off.

share|improve this answer

If it was mine, I would pull out the drive, mount the drive on the iMac with a USB adapter and make a dd image before I tried recovering anything. And when I did go to recover files, I'd do it from the dd image and not the physical drive.

After that, I could use OS X disk utils or third party programs to attempt to recovery files without the worry of destroying any data.

share|improve this answer

put it in a zip lock back and put it in the freezer, the metal will shrink, then you should be able to boot for long enough to get your data

share|improve this answer
    
This answer basically amounts to magic. The theory with freezing is that if an old drive fails to spin up, the lower temperature can cause the bearings to loosen, allowing the drive to become usable, briefly. –  NReilingh Oct 8 '10 at 21:49
1  
It can also introduce condensation to the drive and should only ever be used as a last, last, last resort. –  skub Mar 5 '11 at 19:31

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.