Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a Nvidia 130M graphics card, on an Acer Aspire 5739G model laptop.

When I play games, any games, every few seconds there is somewhat of a "scan line" tear that's horizontal and runs from the bottom of my monitor to the top and slightly shifts the pixels on the screen to the position from one frame to the next. It takes about 2 seconds for the line to go the height of the monitor.

It's not very noticeable, but a tear type of "line" is visible as it goes up the monitor.

If I'm moving the screen a lot, causing a lot of pixel color changes all around the monitor, they become extremely apparent.

I've also noticed that there's a 1px "scan line" horizontally across the monitor consistantly in a position about 1/3 down from the top of the monitor. There's also a vertical "scan line" roughly in the middle of the laptop too.

This is only visible in full-screen DirectX applications, with one exception: A flash game I enjoy, Everybody Edits, also has this problem, and I see the horizontal "scan lines" going up the flash application (not the entire monitor).

The reason I keep quoting "scan lines" is because they're not true scan lines, nor are they even lines - what it really is, is there is a 1px line where all the pixels are shifted to the left by 1 pixel, which is only slightly noticeable unless you're in a place with a huge amount of color differences.

It's a tearing effect, the foreground doesn't update the same frame as the background, so there tends to be little lines or "tears" across the screen where an update is taking place.

What could be the cause? It's not a huge issue, but it is slightly noticeable and I would love to know why this is happening.

share|improve this question
    
Bit of a long shot but does turning on 'vertical sync' in any of your games make any difference? –  pelms Jul 11 '10 at 9:44
    
@pelms Yes, that fixes the problem but I've lost a frame (one game goes from 60 fps consistent to 59 fps), a little strange. Can you post that as an answer? –  Corey Jul 11 '10 at 17:02

2 Answers 2

up vote 4 down vote accepted

Try turning on 'vertical sync' in one of your games and see if it makes a difference. The symptoms sound similar to a problem I get with some games.

Good explanation of vertical sync in this Wikipedia article: Screen tearing.

In effect, the monitor is displaying an image made up of more than one video frame due to the video input not being in sync with the monitor's display frame rate. Enabling 'vertical sync' forces the graphics processor to wait for the monitor to finish displaying a full frame before updating with the next frame.

share|improve this answer
    
Your link is dead. Do you have another. Also I suggest in the future you summarize what's in the links for times like this. –  KronoS Jul 14 '12 at 15:36
    
@KronoS. Link fixed. Cheers. –  pelms Jul 14 '12 at 20:03

Sounds like a RAMDAC/LVDS defect. I'd talk to Acer about repairing it.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.