Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Disclaimer: While this question is about my smartphone and hence may be considered off-topic, I'm hoping the more general issue (which could apply to other USB devices) can be answered in this forum.

My work PC was recently upgraded to Windows 7 64-bit edition.

I have a Palm Treo 680 smartphone and on the previous operating system (Windows XP) it would always trickle charge via USB when I had it plugged in.

However, there is no updated Palm Treo USB driver for Windows 7 64-bit edition, which means I cannot synchronise it via USB (I have to used Bluetooth instead).

One thing I have noticed is that when I plug it in via USB to my Windows 7 computer, it won't even charge. I'm wondering why a valid USB driver would be required for this; shouldn't the charging be occurring at the physical layer of USB, where a driver wouldn't be necessary?

I have a Windows XP virtual machine installed, and when I explicitly "attach" the phone to the virtual machine via the USB menu, it commences charging.

share|improve this question
    
Does that virtual XP instance have the Palm software installed? –  MDMarra Jul 13 '10 at 1:47
    
@MarkM - yes it does. –  LeopardSkinPillBoxHat Jul 13 '10 at 2:06

5 Answers 5

up vote 5 down vote accepted

By default, a device is only allowed to draw up to 100mA from a USB port, and must negotiate with the host if it needs to draw more.

Maybe your device is implemented in a way that does not allow for power negotiation until a driver has taken control of it ?

share|improve this answer

I know that some devices cannot be charged unless the driver software is installed on the computer. Some MP3 players from Creative actually do that. And the Creative ZEN will not charge using a regular USB charger. You need to buy the charger from the company. However, if the pinout is not hacked by the device, a regular USB charger could do the job. Or make yourself a special adapter by only keeping the power pins on an existing USB extension.

You should find the USB specs on the internet. Google for USB CABLE SPECS

JF

share|improve this answer

My Sony ebook (PRS-700) does that kind of thing. It simply will not charge off of USB unless it has a fully established USB session with an actual computer. Those wall chargers with USB ports won't do the trick. And yet, my iRiver Clix2 media player charges just fine off of that same wall charger. It varies by device, for the reason B0fh pointed out.

share|improve this answer

Perhaps you should look into a "charge only" USB cable adapter, like this one from iGo.

share|improve this answer
    
The only problem is that the Treo uses a proprietary connector (on the Treo side). –  LeopardSkinPillBoxHat Jul 14 '10 at 0:01
    
The iGo has an adapter tip for the treo 680. Get the cable and the right tip and you're set –  Knox Jul 14 '10 at 0:49

I had the same problem but I found that a company named Aceeca has released new x64 drivers for Windows 7 which will work with your Treo 680.

64-bit Windows USB Drivers for Palm/Garnet OS http://www.aceeca.com/downloads/download_overview.php/cPath/1/downloads_id/13

Troubleshooting/install guide http://www.aceeca.com/products/pub/english/Troubleshooting_USB_driver_installation_on_Windows_7_64-bit.pdf

share|improve this answer
    
thanks so much, that is very useful. –  LeopardSkinPillBoxHat May 10 '11 at 4:23

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.