Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

The monitor that came with my computer doesn't sleep on shutdown or computer standby. This is particularly annoying since it's an LCD, so the monitor is black but the backlight is still on. I know the monitor can sleep, which it does when I unplug the monitor cable (the DVI cable, not the power cable), use a tool, or when it reaches the inactive time set in my power plan. Specs:

HP Pavilion Elite e9262f

Memory: 6 GB

Video Card: ATI Radeon™ HD 4650

Monitor: HP L2445m

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&lang=en&product=4057515

If it's not possible to have the monitor power off with a setting of some sort, is it possible to set Windows to run a task that turns off the monitor when it goes in standby or shuts down?

Edit: I think this is something wrong with the motherboard or video card; it's not sending a DPMS power off signal to the monitor, it's only sending a black screen.

Edit: There is also no option to change this in the (bad) HP BIOS.

Edit: Unplugging the DVI cable does not work, apparently.

share|improve this question
    
Note: Not a duplicate of superuser.com/questions/164052/my-monitor-doesnt-auto-turn-off. That question is why the monitor doesn't turn off at all. My question is why the monitor doesn't turn off automatically. –  Hello71 Jul 20 '10 at 19:52
    
You say the monitor does sleep when you unplug the DVI cable. Does it sleep if you unplug the computer after it has shutdown? The computer still draws power after it has shutdown - it sounds like it is still sending a signal through the video card?! –  w3d Jul 24 '10 at 21:38
    
Hm... I could swear that it wasn't working before I restarted... Perhaps it's just a temporary glitch? –  Hello71 Jul 24 '10 at 23:16
    
Apparently it only manifests itself once I've been using the computer for a while, then put the computer into standby. –  Hello71 Jul 25 '10 at 14:24
    
Have you left it for a long time to see if it sleeps after a long while?! I'm just thinking charged capacitors etc... –  w3d Jul 25 '10 at 17:28

4 Answers 4

You can change that in the settings: right click on desktop > Personal settings > Screensaver > Edit energy settings > Change when my monitor should be turned off. There you can just change the settings.

Note that the actual menu items might be different, I have a Dutch version of Windows, so I don't know what it's actually called. Should be something like this, though.

share|improve this answer
    
The thing is, the monitor successfully turns off when the time set in there is reached. The problem is when I shut down the computer. –  Hello71 Jul 20 '10 at 21:19
    
CAn you not set it to hibernate? –  Xavierjazz Jul 25 '10 at 18:02
    
@Xavierjazz: Disable hibernation? I disabled Hybrid Sleep (similar to hibernation) a while ago for different reasons. –  Hello71 Jul 26 '10 at 1:52

Check if your BIOS has an entry similar to "Video Off Method".
If it doesn't, maybe a BIOS update if available can help (but to be done with extreme precaution, as failed BIOS update can brick the computer).

Quoted from Power Management Settings :

Video Off Method : The DPMS (Display Power Management System) option allows the BIOS to control the video display card if it supports the DPMS feature. The Blank Screen option simply blanks the screen - use this for monitors without either power-management or "green" features. The V/H SYNC Blank option blanks the screen and turns off vertical and horizontal scanning. If your computer and monitor were built within the last four years, I recommend setting this to DPMS.

image

share|improve this answer
    
On another computer I have, this option is available. On the failure of an HP BIOS, it's not available. I tried a BIOS update, it's still not there. –  Hello71 Jul 25 '10 at 14:23
    
@Hello71: Looks bad. Maybe try analying with "powercfg -energy". See for starters howtogeek.com/howto/7638/…. The full info is in google.com/… –  harrymc Jul 25 '10 at 18:46

You may have done this, but:

Check the OSD menu for power save options on the monitor itself. Link to directions is here.

Check under the section "Energy Saver Feature".

share|improve this answer
    
I've already checked and already commented that I know the monitor is powering off, it's the video card that's not outputting a DPMS off signal. –  Hello71 Jul 26 '10 at 22:24
    
If the setting were set correctly, then unplugging the cable would turn it off. Have you tried a different monitor? It really sounds like an issue with the display to me. –  JNK Jul 27 '10 at 0:16
    
Unplugging the cable while the computer is outputting video shows "Check Video Cable" on the screen. –  Hello71 Jul 28 '10 at 14:37
    
OK, and have you tried a different monitor? –  JNK Jul 28 '10 at 14:45
    
A different monitor goes to sleep when I put the computer in standby. –  Hello71 Jul 29 '10 at 18:48
up vote 0 down vote accepted

I think I know what's going on. The HP L2455m only responds to a DPMS power off, or a disconnected cable. Windows tells the video card to send a DPMS power off signal to the monitor when the time specified for turning off the monitor in the current power profile is reached. When I put the computer in standby, Windows does not tell the video card to send a DPMS power off signal, so it's up to the motherboard. The motherboard doesn't do anything, so the video card defaults to a blank screen. My question now is how to either:

  • Set the BIOS to tell the video card to send a DPMS power off signal to the screen instead of defaulting to a black screen, which seems to be impossible without writing a custom BIOS, or

  • Configure Windows to run a script when the computer is turned off or put into standby (in this case, turning off the monitor).

I'm thinking that this should be posted as a separate question. (Or is that for meta?)

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.