Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

i am just curious. with wireless+Ethernet or dual Ethernet, i can connect to 2 different networks at 1 time. but i noticed that if i connect wirelessly and connection with Ethernet is up, the internet sometimes goes down. i think the Ethernet internet is not so stable at time.

so my question is, when i have more than 1 connection to the internet, it can't load balance the traffic? maybe i am dreaming?

it wont automatically connect to the other connection if 1 goes down?

share|improve this question
up vote 3 down vote accepted

I'm pretty sure what you're referring to is bridging

You can bridge the two connections in your network settings to make them act as one. Otherwise, depending on your system, it would either default to one or just not accept incoming data.

With both bridged together you don't really stand to gain anything if you're connecting to the internet because your bottleneck will almost always be the router.

Considering that you're wireless connection will usually be either 54 mbit or higher and you're ethernet will be 100 or 1000 mbit. Whereas, internet connections usually top off @ 20 mbit for expensive premium accounts and 4-6 mbit for 'normal' user accounts.

IE, your internet connection won't get any faster by bridging the connections.

share|improve this answer

It's based on binding order. In windows XP this is in Network Settings -> Advanced -> Advanced settings.

share|improve this answer

It is OS-dependent but, generally, the OS will not attempt to do any load-balancing but instead pick one network card and gateway to use and simply route all traffic through that unless the network is disconnected.

share|improve this answer

There are ways to bind specific applications to different network interfaces.

However, unless you're using specific software like the above, or the software natively binds to one interface (common on linux), anything trying to access the Internet will just follow the default route in your routing table.

share|improve this answer

No, it's a dream, you can't balance load as you can't split the connection,
you would need special software written for that purpose.

Yes, if one connection goes down Windows will pick the other automatically.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.