up vote 1 down vote favorite
share [g+] share [fb]

I finalized the process of imaging a bunch of Z200. Right now, I need to setup a computer running Windows 7 with a DVI screen and the other one, connected with the DisplayPort/DVI adapter. This one is not working...

I have a auto-input scan screen but it doesn't recognize it. In the nVidia control panel, I'm not able to detect the DP screen.

Is there something I need to do with that?

CARD: nVidia Quadro FX580

HP Z200: QuadCore, 6go RAM, 500go HDD and of course an optical mouse!

Screen: HP L1940T

link|improve this question
84% accept rate
feedback

1 Answer

up vote 2 down vote accepted

Have you tested the adapter? If you are using an adapter in my experience it's the most common point of failure.

link|improve this answer
1  
I have 6... hold on my friend! – r0ca Jul 23 '10 at 20:08
We finaly tried some of the adapter. It's working with a newer model of HP screen but I then tried it with another workstation and al of them are working fine now. Kind'a frakkin' weird!!! – r0ca Jul 23 '10 at 20:29
So does it work OK with the original WS? – JNK Jul 23 '10 at 20:31
feedback

Your Answer

 
or
required, but never shown
discard

Not the answer you're looking for? Browse other questions tagged or ask your own question.