I am having Grub2 issues in my Ubuntu 10.04 dual boot, 2 hard drive system. So I am attempting to follow the standard grub2 reinstallation guide (cant post link because of spam filters allowing only one... ಠ_ಠ)
Don't know if this is the root of my problem, but my speedy internal HD with my OS on it is not showing up anywhere in a live session.
Not in nautilus, behind fdisk.... no where. When I can get the main system to boot, there is no issue seeing all available partitions. But the live session sees only the 1TB internal media/backup hard drive.
I need access to the other hard drive and it's partitions to finish the grub2 re-installation but I am not sure anymore that is the underlying issue. Anyone have experience with this?
The issue I have identified as a grub2 issue is fully described here. SandPvvr describes it exactly. Some notes:
- I do not see the grub2 menu for my os's
- holding down the shift key after my bios screen works maybe 10% of the time
- Not related to reinstalling a windows os. havent been touched in a year
- do some web development. issue may have started when I was playing with ruby and django. not sure on this. Could a dev environment do this?
fdisk in live session
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0001d518
Device Boot Start End Blocks Id System
/dev/sdb2 1 121601 976759939 5 Extended
/dev/sdb5 487 110765 885816036 83 Linux
/dev/sdb6 110766 121601 87040138+ b W95 FAT32
/dev/sdb7 1 486 3903700+ 82 Linux swap / Solaris
Partition table entries are not in disk order
