Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My computer was custom built. There's this little thing inside I can see (the tower's left side is clear plastic). It looks like digital clocks, only with two digits. It seems like it may have been a thermometer or something, since it only has 2 digits. Can anyone confirm this? I'm asking because today my computer has been freezing nearly after logging in (probably takes 120 seconds) and that little reader I was talking about says "FF" instead of numbers like normal.

Any ideas what this piece of hardware is, or what "FF" would mean?

EDIT: Actually, I just realized I think it's probably reading hexadecimal, since at one point it said "7F".

share|improve this question
    
I've no clue what it is... but I'd ponder a guess that the FF is hexidecimal. FF is 255 in decimal... so maybe that will help? –  Aeo Aug 2 '10 at 17:11
    
Pictures, please? –  Bobby Aug 2 '10 at 17:13
add comment

3 Answers

up vote 3 down vote accepted

Like JRobert mentioned, some motherboard are equipped with 2 digit hexadecimal diagnostic displays. Typically on these, 'FF' is reserved as the last message, which indicates that all the other tests have completed. This doesn't really indicated whether there is a problem or not.

What you need to look for is anything displayed prior to the FF.

This may not be correct for you, depending on the manufacturer of your motherboard. I would pop open the case and see if you can identify the company, and model of that particular board. Then check their website, and download the manual for it, you should be able to get more detailed diagnostic information from them

share|improve this answer
add comment

FF is Hexidecimal for 255, which in binary is almost the highest number in 8bit systems (i.e. 2^8 = 256). It probably means max value.

If it is a thermometer, you have a problem. Is there no documentation that came with the PC, or you never asked what the display indicated?

share|improve this answer
    
Someone else and I built it a few years ago - and I just have no idea what it is. –  Matthew Aug 2 '10 at 17:17
    
Then we will need a pic. –  JNK Aug 2 '10 at 17:18
add comment

Some boards were built with a digital readout that the BIOS could use to show error codes, in case the power-on self-test fails with no way to write to the screen. Perhaps your custom board has one of those.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.