Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My internet provider has done static binding to thee MAC address of my adapter. Now I need to use the same internet connection on another machine also.

So, I figure that one way of doing that is to change the mac address of my second machine to that of my first machine (making both of them same).

Is there any harm in doing that? Or any reasons this is not advised?

share|improve this question

3 Answers 3

up vote 3 down vote accepted

Well, your second computer will also get all of the traffic intended for your first computer. But that shouldn't be a problem since the NIC should filter out the traffic headed for your other computer (based on the IP in the packets). A better idea would be to get a router, set its mac address to that of your first computer, and then connect to it from both of your other computers. The other advantage would be that you should be able to connect with other computers, too.

share|improve this answer
2  
Router would solve the problem, be relatively inexpensive and allow multiple users easily. –  Dave M Aug 4 '10 at 20:26
    
Having two devices with the same MAC will cause problems; the DHCP server cannot tell them apart and will only assign one IP address. –  Kevin Panko Aug 4 '10 at 22:16
    
@Kevin, If you manually assign IP addresses that won't be a problem... but you're right if the OP is using DHCP and not static IPs. I guess the OP's ISP probably connects the IP to his/her MAC address and probably wouldn't route the packets to a different IP. Boy that's a lot of P's... –  Wayne Werner Aug 5 '10 at 12:26

If both of those computers are on the same network then yeah having duplicate MAC addresses is a bad idea. The whole idea of MAC addresses is that they are unique for network identification purposes (long before your IP stack comes into play).

Check out http://serverfault.com/questions/88830/can-duplicate-mac-addresses-on-same-lan-cause-trouble for some insight via the answers to that similar question.

HTH...

share|improve this answer

To rephrase the other answers to more directly address your question - no, there is no harm in cloning the MAC address as long as you make sure that both machines aren't plugged into the same Ethernet at the same time.

If you've got Machine A plugged into your cable modem or DSL router, and you're going to unplug Machine A and plug in Machine B instead, this should work fine.

But, as people have said in this question and in response to your other question, the right way to address your situation is to buy a simple router that does NAT, let your ISP bind to the MAC of the router, and then you can do whatever you like on your LAN and your ISP won't know or care.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.