Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I installed Virtual box V3.2 on a machine. Now I cannot ping that machine from another computer on the network. I have confirmed that the IP address of the machine is same.

I can browse the internet and access other machines on the network, from the machine on which I installed virtual box.

Any idea why this could be happening?

share|improve this question

migrated from stackoverflow.com Aug 5 '10 at 18:59

This question came from our site for professional and enthusiast programmers.

    
Is the ping timing out? or some other error? –  bryan Aug 5 '10 at 19:10
    
Yes the ping is timing out. –  user45331 Aug 6 '10 at 5:14
1  
Using the terms "Guest OS" and "Host OS" are helpful for differentiating between the systems. Are you saying that you can't ping the Host OS with a different machine on your network? –  Zoot Oct 5 '10 at 17:36
add comment

3 Answers

If you are trying to ping the Guest OS and you are using NAT for networking, it might not always work. It was a limitation of ICMP protocol traffic in NAT mode for VirtualBox.

NAT in VirtualBox does have these limitations (per the User Manual):

There are four limitations of NAT mode which users should be aware of:

ICMP protocol limitations: Some frequently used network debugging tools (e.g. ping or tracerouting) rely on the ICMP protocol for sending/receiving messages. While ICMP support has been improved with VirtualBox 2.1 (ping should now work), some other tools may not work reliably.

Receiving of UDP broadcasts is not reliable: The guest does not reliably receive broadcasts, since, in order to save resources, it only listens for a certain amount of time after the guest has sent UDP data on a particular port. As a consequence, NetBios name resolution based on broadcasts does not always work (but WINS always works). As a workaround, you can use the numeric IP of the desired server in the \server\share notation.

Protocols such as GRE are unsupported: Protocols other than TCP and UDP are not supported. This means some VPN products (e.g. PPTP from Microsoft) cannot be used. There are other VPN products which use simply TCP and UDP.

Forwarding host ports lower than 1024 impossible: On Unix-based hosts (e.g. Linux, Solaris, Mac OS X) it is not possible to bind to ports below 1024 from applications that are not run by root. As a result, if you try to configure such a port forwarding, the VM will refuse to start.

share|improve this answer
add comment

Networking within, to, or from a virtual machine can be a complicated topic. Please do your own homework/research first, then come back with specific questions if it still doesn't work.

Here is a good place to start: http://www.google.com/search?hl=en&ie=UTF-8&q=virtualbox+networking

share|improve this answer
    
Thank you but the problem is to about pinging the virtual machine. The problem is that I cannot Ping the machine on which Virtual Box application is installed. –  user45331 Aug 6 '10 at 5:14
add comment

In my experience, I have to bridge the Host OS network connection with the Virtual Box connection in order for the guest OS networking to work.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.