Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I know for a computer I can change the BIOS settings to have it 'auto on'. This way the computer turns on by itself after power is restored ( instead of manually having to start the computer after power loss). Is there a similar BIOS setting or a program which I Can use to auto restart a latop?

Thanks

I am asking this as a general question as we are planning to buy some cheap dell laptops. So I did not include the make and model.

share|improve this question
2  
Perhaps you'd like to edit your question to include the make and model of your laptop. –  Chris Aug 17 '10 at 20:26
    
+1 Chris. (As far as I am aware the VAST majority of laptops don't have this, however; it seems like a good way to damage a drained battery...voltage potentials can vary with temperature so you could throttle it on and off a lot. Also potential for situations like "the machine cut off because the battery jolted slightly loose...user puts it in a bag, the battery makes contact, laptop fires up inside the bag and starts a fire". Just an all-around bad idea.) –  Shinrai Aug 17 '10 at 20:55
    
@ Shinrai: obviously you do not have remote field requirements like me Shinrai. Besides battery is least of concern and can be taken out. –  AP01 Aug 19 '10 at 18:04
add comment

3 Answers

We have the same situation with a laptop in a remote location. We hook it up to a 2 hour UPS and when it quits during a power outage, the laptop battery is set to go to sleep mode when the battery reaches 50% discharge. In sleep mode, we find it will last for more than a day. A meaningless task is set to run every 24 hours, but only when AC power is on. This task can wake the computer. So, when power is restored to the laptop, the computer wakes up, within 24 hours.

share|improve this answer
add comment

I would not expect it to be available on any laptop. Some, but not all, Desktop PCs offer this functionality. Older PCs where the switch actually switched the power is was there by default. Newer PCs may have options which return to state at power interruption (not necessarily reliably), or power on automatically. Modern power supplies usually don't fully power off, but provide limited power for things like the Wake-on-LAN and the power button.

Because of the battery, power disconnect does not mean shut down for a laptop. The laptop will have functions to handle shutting down when the battery runs down. It will have limited funtionality when the power is connected. Mostly this consists of an indication if the laptop has line power or not. The only power-on mode that would make sense on a laptop would be Wake-on-LAN, but that would likely need the laptop to be in sleep mode.

share|improve this answer
    
Ok is the battery is issue of problem we can take away the battery and just use the power cord. Do you have any suggestions? –  AP01 Aug 19 '10 at 13:51
    
Use a PC rather than a laptop. You need either a power supply which uses a real switch (don't think they do that anymore) or a BIOS which support startup after power fail. I don't believe you have any hope of either on a laptop. –  BillThor Aug 20 '10 at 5:23
add comment

I'm assuming you're using a PC by the way you phrased your inquiry. If so, it depends entirely on the manufacturer of the BIOS, which varies between computer manufacturers and sometimes even between models from the same manufacturer. I used to work for Dell in the Manufacturing Line Support area so I have some intrinsic knowledge of this subject.

Other than going to your BIOS and exploring it for a solution, you can really only contact your system manufacturer and investigate with their support team.

As for auto-resume support via programs, such an application would require direct BIOS support to implement that functionality so I'd wager you won't be able to locate such a program.

share|improve this answer
    
Can you guide me where I can find a BIOS support program? This is for a laptop on Field and we need to turn on by itself after it gets back power after power loss ( sometimes power loss is longer than a day so battery or ups does not help ) –  AP01 Aug 19 '10 at 13:53
    
You could try contacting the BIOS manufacturer (notice -- not the motherboard manufacturer, likely this is Phoenix or AMI) and ask them about such a program. Aside from that, other than popular search engines, I'd not know what to recommend. The reason I wagered you wouldn't be able to find such a program is that the expertise required to write such a program is substantial, and more than likely doesn't exist at all. Still, you could try... –  Hardryv Aug 23 '10 at 6:56
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.