Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I need to do create a file with a filename such as :>?, is this possible somehow? Windows stops it.

share|improve this question
Well each restricted character has another meaning or usage, so if a file or folder name did contain them it could cause Bad Things™ to happen. Mind if I ask why you are trying to do this? – DMA57361 Sep 11 '10 at 18:04
@DMA57361, when I did this a few years ago, I was testing some things. If I recall correctly, the results were amusing but I don’t recally anything specifically bad happening. At most, I was simply unable to access them. (Though I suppose it could cause trouble if for example, you happened to have files named a, b, and a>b and tried to view the last file as using type a>b. Oops.) – Synetech Nov 30 '13 at 21:49
@moorecast, when I did this a few years ago, I made the files/directories with dummy names, then used a disk-editor to manually set the names in the directory entries directly. Of course that was on a FAT32 volume, so it was very easy. It would be a little harder on an NTFS volume. – Synetech Nov 30 '13 at 21:51
Mind if I ask why you are trying to do this? Maybe to implement a (poor) copy-protection? – Synetech Dec 7 '13 at 5:30

Unfortunately, you cannot use the reserved characters when creating folders or files due to them being part of system functions.

What I recommend you do is look through the Character Map application - You can go to run and type charmap.

from here, you may be able to find alternate symbols that look the same, for example:

(copy and paste these, you will see that they are different)

Instead of forward slash / - you can use a division symbol

Instead of Colon : - you can use the modifier letter colon

and so on!

alt text

share|improve this answer
Making it even harder to delete! :-) – Arjan Sep 11 '10 at 18:29
@Arjan - only via command prompt.. even then you can use the tab key for autocomplete. – William Hilsum Sep 11 '10 at 18:49
/ is a slash - not a backslash – Dennis Williamson Sep 11 '10 at 19:12
@Dennis Williamson, thanks, edited. – William Hilsum Sep 11 '10 at 19:44
I used to use this trick for certain situations like when I need to put a question in a filename (why oh why did Microsoft make the question mark reserved‽ ఠ_ఠ) Unfortunately, I had to stop using any non-ASCII characters because they cause problems with things like defrag programs which for some reason seem to be unable to move files that have Unicode characters in their names. ಠ~ಠ – Synetech Nov 30 '13 at 22:00

You can boot from a Linux disk (such as Knoppix), and mount the NTFS partition.

Linux has much less restrictions on files names, and will let you create such names (I have tried it).

share|improve this answer

Some operating systems prohibit some particular characters from appearing in file names: (Resource from Wikipedia)

/ slash used as a path name component separator in Unix-like, Windows, and Amiga systems. (The MS-DOS shell would consume it as a switch character, but Windows itself always accepts it as a separator[2][vague])

\ backslash Also used as a path name component separator in MS-DOS, OS/2 and Windows (there is no difference between slash and backslash); allowed in Unix filename

? question mark used as a wildcard in Unix, Windows and AmigaOS; marks a single character. Allowed in Unix filenames

* asterisk used as a wildcard in Unix, MS-DOS, RT-11, VMS and Windows. Marks any sequence of characters (Unix, Windows, later versions of MS-DOS) or any sequence of characters in either the basename or extension (thus "." in early versions of MS-DOS means "all files". Allowed in Unix filenames,

: colon used to determine the mount point / drive on Windows; used to determine the virtual device or physical device such as a drive on AmigaOS, RT-11 and VMS; used as a pathname separator in classic Mac OS. Doubled after a name on VMS, indicates the DECnet nodename (equivalent to a NetBIOS (Windows networking) hostname preceded by "\".)

| vertical bar designates software pipelining in Unix and Windows; allowed in Unix filenames

" quotation mark used to mark beginning and end of filenames containing spaces in Windows

< less than used to redirect input, allowed in Unix filenames

> greater than used to redirect output, allowed in Unix filenames

. period allowed but the last occurrence will be interpreted to be the extension separator in VMS, MS-DOS and Windows. In other OSes, usually considered as part of the filename, and more than one full stop may be allowed.

share|improve this answer
You can safely dial down the <bold> hyperbole: it is possible to import files with illegal characters, – hyperslug Sep 11 '10 at 18:28
The question isn’t why can’t I use some characters in filenames; it is how can I force the use of reserved characters. As such, this answer is an answer to a different question. At most, this should be a comment with a link to the Wikipedia article. – Synetech Nov 30 '13 at 22:10

The only way is to manually edit the hard drive using a program like HxD. If you do this though, most likely the files won't be accessible by any program. For example, if you tried to open a file named abc\def.txt, you'd get a message that the directory abc doesn't exist.

share|improve this answer
+1 This is how I did a while back. I was easily able to use every single reserved character by directly editing the FAT directory entries. (It’s also possible in NTFS, but slightly more involved.) – Synetech Nov 30 '13 at 22:05

You can install the Subsystem for Unix Applications if you're on Ultimate or Enterprise. From there you can create such names.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.