Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

My laptop has a Core Duo T2450 CPU with 2 PC-5300(333MHz) DDR2 RAM which are from same make. But the CPU-Z report shows the RAM only runs at 266MHz. Is there any way that I can make it runs at 333MHz? Please help, thanks.

share|improve this question
up vote 3 down vote accepted

The manual on claims that DDR2-667 (i.e 333MHz) is usable on your system.

You may need to go into your BIOS and check the memory settings are not limited to 266MHz, or that the memory timings are not set and so preventing the memory module from using the higher speed.

Otherwise it may be that you need to update the BIOS from the page I linked in order to enable to higher memory speeds.

share|improve this answer

If BIOS doesn't have the options to force 333 MHz operation, sometimes one or both of the DDR DIMM modules themseles have their settings programmed incorrectly in the SPD (Serial Presence Detect). Try using two different DDR2-667 DIMM modules to see if that is the case.

share|improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .