Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have this notebook that I use both at work and at home. I often watch a movie at home with my headset plugged in and the volume high enough to be able to hear it well. At work however I listen to my iphone, so I have nothing plugged into the laptop.

Every single morning at work I start working until an error occurs or any other event that causes sound, and I find out my speakers are still on high volume, annoying the crap out of me and my colleagues.

My iPhone switches to the last used volume whenever I plug in or out my headphones. Is there a way for my notebook to do this as well? (I use windows 7)

share|improve this question

3 Answers 3

up vote 4 down vote accepted

Open the volume mixer (click the speaker icon in the system tray and choose "mixer"), you will probably find the left-most column (Device) will say "Speakers". Click the down-arrow next to this icon - this allows you to choose other devices, such as headphones, and you can then adjust them seperately.

If headphones isn't given as an option, or there's no down-arrow, you may need to right-click the speaker to access further option to unhide the headphones. Alternatively make sure you try this with the headphones connected.

Alternatively you can adjust these using the Sound options in Control Panel, again make sure you unhide disconnected / not active / I-forget-the-term-it-uses devices if you don't see headphones listed at first.

If the headphones option is missing (especially when they are connected) from the mixer and in the Control Panel sound options, then I'm afriad you computer cannot tell the difference between when you are using your speakers or headphones - meaning there is unlikely to be a software solution.

share|improve this answer
    
Wow, thanks. I never knew those options were there. My system does give the option to change headphones volume vs. speaker volume, but it doesn't seem to switch between the two when I plug them in or out. I think the one it recognizes though is the USB headset I sometimes use for skype, not the 3.5mm ones I use now. I can set it to default to headphones though, which disables the speakers when it's plugged out. Unless you have any tips on how to automatically switch I'll stick to defaulting to the headset :) Thanks! –  Stephan Muller Sep 21 '10 at 13:36
    
Hmm, I seem to be wrong on that one. I can select the headset to set its properties but I cannot select it as the device I'm currently using (or as the default audio device for that matter). I think that proves that the system is talking about the USB headset, not this one. Apparently it doesnt work for a regular 3.5mm headset. –  Stephan Muller Sep 21 '10 at 13:41
    
@Litso - That's unfortunate. Will it let you just mute or disable the main speaker volume? Not ideal, as it effectively returns you to the original problem but at least you wouldn't get sudden loud blasts. If you want proof RE your USB headset - plug it in, play some music through it, and mess with the volume control. –  DMA57361 Sep 21 '10 at 13:48
    
Yeah, I don't have that on me. I fiddled about some more and my current headset just isn't recognized. I'm afraid there's no solution for this problem, I'll have to get used to turning down the volume either after watching something or when starting up in the morning :P –  Stephan Muller Sep 21 '10 at 14:12
    
@Litso - Maybe instead you could use something that mutes the volume as you boot up or shutdown? Suggestions in this question may help. –  DMA57361 Sep 21 '10 at 14:23

If you have SmartAudio(it came with my toshiba laptop) then this is what you do. You click on the Audio Director tab at the bottom, and then select multi-streaming. Then, if you click on the volume icon in the taskbar, you will have headphones and speakers as two separate devices, each able to have different audio levels.

share|improve this answer

Sometimes you should check the driver; if your sound card driver is older than Microsoft Windows 7's release (such as 2010 or earlier) and if you don't use anything like SPDIF of your on-board card, you better use the default driver of Win 7, because it will auto-adjust the volume when you plug in your headphones. Some old drivers can't do that.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.