Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a failing hard disk. Which linux said that I would need to replace. I'm still saving to buy a new one. And since I have an external hard drive I want to use it as primary boot device where I will install the os. Windows 7 preferably. Here are the details of the hard drive: http://www.seagate.com/www/en-us/products/external/freeagent/freeagent_go/#tTabContentSpecifications My laptop can boot from external hard drive. What other things do I need to consider before doing this? Will the performance decrease if I do this? Is the installation still the same if I installed the os on an external drive.

share|improve this question

2 Answers 2

Will the performance decrease if I do this?

USB devices are very slow compared to internal drives.

Is the installation still the same if I installed the os on an external drive.

No. Windows was not designed to install to a USB connected device. I believe it is technically possible to get it working but it is far from trivial.

Have you considered simply removing the drive from the external enclosure and installing it into your computer?

share|improve this answer
It's far from trivial to remove the hard drive from a FreeAgent. –  fideli Oct 2 '10 at 14:37

Will the performance decrease if I do this?


External USB 2.0 Drive: Yes, definitely slower.

External e-SATA Drive: No, speed should be the same.

The Seagate drive you linked to appears to be USB 2.0 only, therefore is will be slower.

Check if your laptop has an e-sata connection, and look for an external drive with such a connection.

Another alternative to replacing your existing drive is to swap out your DVD-ROM drive with a second hard disk caddy. (Assuming it is a SATA connection internally). This works well for me.

share|improve this answer
Just another thought.. If you don't have an e-sata port, then you can get an Export Bus card that adds one: en.wikipedia.org/wiki/ExpressCard . If you only have PCMCIA, then don't bother, since the bus speed will be too slow for true SATA speeds. Also USB 3.0 drives are upon us, which may also be an option.. –  Andrew Oct 4 '10 at 2:15

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.