Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Possible Duplicate:
Resources for building computers

Are there any tutorials or information on building a desktop computer? I am planning to build one to accommodate my need for a faster machine for using Adobe Photoshop and Illustrator on.

I've gotten a few PDFs on it, but they aren't incredibly precise. I'm new to system-building and would love to have something to refer to lest I make a mistake on the build and ruin it.

share|improve this question

marked as duplicate by Sathya, BinaryMisfit Oct 3 '10 at 22:05

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

@openfkg SuperUser is meant to be source for Google. lmgtfy is not welcome her and there are no questions too easy for this site. It has been discussed many times in meta, so if you disagree feel free to express your opinion there. – AndrejaKo Oct 3 '10 at 12:02
I'd normally agree, but pretty much ALL the links on the first page of that search are highly on topic. – Fake Name Oct 3 '10 at 12:05
@AndrejaKo: Comment != answer. I just asked whether he is looking for general information (e.g. physically connect the components) or he is looking for something specific like the advantages of multi-core GPUs. – agporwfnz29 Oct 3 '10 at 12:21
@openfkg Why the lmgtfy link then? – AndrejaKo Oct 3 '10 at 16:03
up vote 2 down vote accepted

Keeping the following in mind should ensure you don't ruin anything during building:

  • Wear a properly grounded antistatic wrist strap.

  • Do not drop anything (like screwdrivers or screws) on exposed circuit boards like motherboards, expansion cards. Handle motherboards and expansion cards by the edges. Don't bend circuit boards. Make sure before powering a built PC on that there are no loose screws on the board.

  • When installing a CPU, check, double check, and triple check that the pins are in the right way before clamping it down or installing the thermal grease/heatsink. Don't ever touch CPU pins or the exposed areas of the CPU.

  • Motherboards should never make direct contact with the metal case. They must be placed atop standoffs, which should be placed in the case first, then the screws go into the standoffs with the motherboard in between.

  • Most everything in a PC these days that plugs in only goes in one way, i.e. something on either the plug or the socket is keyed. Never force anything to plug in that doesn't fit.

  • PCI/PCIe cards can be hard to insert and remove. But the card edges should always line up.

  • A motherboard should never be powered on while you are installing or removing stuff. Most power supplies have a switch on the back to physically cut the power off. Make sure at least that is OFF and you wait a minute or two before installing/removing things. (Most motherboards have an LED that shows if the board is still powered or not.)

  • Never power on a board if the CPU is installed, but either the thermal grease/heatsink have not been installed, or the heatsink fans are not connected. You could permanently damage the CPU.

  • Make sure you get a power supply with enough wattage to power all components. Try not to skimp funds on the power supply.

share|improve this answer
Thank you very much for your answer. :) – JFW Oct 4 '10 at 12:55

Not the answer you're looking for? Browse other questions tagged .