Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.
  • I want to access a second machine using my primary machine.
  • I need a functionality similar to Remote Desktop Connection, but without actually using Internet.
  • Both the machines have bluetooth, but I dont think that would be able to provide sufficient bandwith.
  • I also have a spare CAT5 cable that I can use.

Any suggestions how I can connect these two machines?

The main purpose as of now is to run Windows on first machine and Ubuntu on second, and then control both from the first machine.

share|improve this question

3 Answers 3

  1. Connect the 2 machines using the cat5 cable. The NICs should do auto-mdix so you don't have to care if you have a crossover cable or not.
  2. Configure the two PC in the same subnet. e.g PC1 192.168.1.1 Subnet-mask: 255.255.255.0; PC2 192.168.1.2 Subnet-Mask 255.255.255.0;
  3. Install NoMachine NX Server on Ubuntu
  4. Install NoMachine NX Client on Windows-Box

Info: http://en.wikipedia.org/wiki/NX_technology https://help.ubuntu.com/community/FreeNX

share|improve this answer
1  
@Lazer I've not had much luck getting NX running. If you find yourself in a similar situation, try VNC (sudo apt-get install vncserver) and grab yourself your favorite VNC client for windows. –  Darth Android Oct 9 '10 at 22:05

Connect them both through a cat 5 crossover cable. Set the IP of the first machine static to 192.168.1.1 or something of the kind and the IP on the second machine static to 192.168.1.2.

If 192.168.1.2 is your machine that runs RDP, you could just connect the RDP client to 192.168.1.2.

share|improve this answer
1  
Nowadays, most Ethernet devices will reverse the wire pairs if needed (it's even enough if one of them does it) so crossover cables are seldom needed. –  Gilles Oct 9 '10 at 22:49
    
Auto-sensing is part of the gigabit ethernet standard. –  paradroid Oct 10 '10 at 5:26

Internet has nothing to do with remote desktop ...

If you have any DSL router, switch or hub, just connect both computers with a UTP (you'll need 2) , assign IP addresses (if there is no any DHCP available) and use remote desktop.

VNC is another option, works all right, but is slow and have screen refresh issues.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.