Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have an old power supply that I am going to use to power some fans. Does the power cord that connects to the power supply need to be grounded? I have an extension cable with no ground and I'm wondering if it is safe to plug a power supply into it.

share|improve this question
add comment

migrated from serverfault.com Oct 12 '10 at 17:32

This question came from our site for professional system and network administrators.

3 Answers

up vote 4 down vote accepted

While it will likely be fine (I've run many computers in old houses that had no grounding), it's not advised. A static charge will build up, and depending on where it discharges may cause damage to the electronics.

Annoyingly this damage is usually hard to pinpoint, because it can show itself after a while or lead to only intermittent failure. Not fun to troubleshoot, so if possible put a ground lead on a heating-pipe or other grounded object in your house.

share|improve this answer
add comment

Does it work; yes. If your in North America, the power system is ground/neutral and a single hot wire (for 120v). That said it's "less safe" without that ground pin explicitly grounding the case to earth ground. I wouldn't do it and I would recommend you do the same.

share|improve this answer
add comment

No.

It is of course better/safer to have it grounded, but not really necessary. All my power outlets are without a "ground-pin" (except one in the kitchen and one in the bathroom) and I have had (2-4) computers connected without issue for about 12 years.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.