Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have 1 EIDE HDD as a primary O/S disk and 2 SATA drives in SATA 2 & 3 on my mobo, which are BIOS configured for RAID. This setup has been working fine for several years.

However, the EIDE HDD with Windows XP installed is failing, so I have purchased a new Western Digital SATA drive and installed it in SATA 1 on my motherboard. Besides that the mobo has two remaining SATA ports, labeled SATA 4 & 5. The rear panel has an eSATA connector.

With the new drive installed it shows up as a "single-disk" device in the RAID device list (but not as part of an array). In the main BIOS HDD list, the new drive does not show up as a SATA drive (neither do my two RAID drives).

When I boot from the Win 7 install disk, intending to install Win 7 to the new SATA drive, it can't see the SATA drive, only the old EIDE drive and I can't proceed. However, the new drive shows up in WinXP Computer Management as a drive, and it allows me to format it. I tried disconnecting the power from the EIDE drive but Win 7 installer just shows no available disks. AFAIK, there are no RAID drivers required for my HW RAID - the disks just appear to Windows XP as an ordinary single drive.

What do I need to do to get Windows to install to my new drive?

EDIT 2010-10-15: Yes, my MSI motherboard does have RAID drivers, so the question becomes, how do I get the Win7 installer to install to a disk controlled by my BIOS RAID controller?

(Note that I am leery about breaking my existing RAID array, even just temporarily, since reconstituting the contents from my backups is a tedious task and there's always the chance I might lose something.)

System Summary:

Mobo       : MSI 790GX-G65
CPU        : AMD Phenom II 965 BE at 3.6 GHz
Memory     : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21
HDDs       : 1 EIDE (WinXP), 1 SATA (to be Win7), 2 SATA in RAID-1 (Data)
Card Reader: Aero cool multi-card reader and removable USB drive bay.
share|improve this question
up vote 1 down vote accepted

To install the RAID driver during the Windows install you need to have the driver on a CD or USB drive. When you reach the hard drive list option it will be empty, there is a button to load drivers. Choose this option and then insert the cd/usb drive and locate the driver. If all works properly, you will then be able to see the drive and install Windows 7 on it.

share|improve this answer
Also, very important is to disconnect the old IDE drive first. Otherwise Win 7 will install the RAID capable boot-loader on the IDE drive as a dual-boot system, and the startup repair facility does not load the RAID drivers correct so there's no way to boot from the Win 7 one you remove the IDE drive. – Lawrence Dol Oct 16 '10 at 19:14

Perhaps you need to enable the drive in the BIOS.

share|improve this answer
As I said, main BIOS doesn't show it; it shows up instead in the list of RAID devices as a "single disk". – Lawrence Dol Oct 15 '10 at 4:46

Check the BIOS settings for the SATA ports, they might be on the wrong setting and need to be changed to SATA or AHCI

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.