Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I want to move a volume from a smaller drive to a larger unformatted one. What is the best way to achieve this? Ideally I'd like the new volume to have the same name as the older volume as it contains user accounts, and is a destination of various symlinks that I have on other volumes.

Update: I used Carbon Copy Cloner in the end and it worked perfectly. I was able to simply rename the new volume in Finder to the same name as the old volume and then powered down and removed the old drive on which the volume lived. When I restarted, the new volume seamlessly worked in place of the old volume.

share|improve this question

4 Answers 4

up vote 8 down vote accepted

Try Carbon Copy Cloner. It does a bit-by-bit copy, which should guarantee that it is an EXACT copy. I hope this helps.

share|improve this answer
    
FYI CCC as well as SuperDuper! do not do bit-by-bit copies. If they did the two disks would not be usable at the same time on the same system because internally they are identified by an id which is stored inside the partitions. Unix tool dd does a bit-by-bit copy (for free as it's part of the OS) and ... here's what happens if you do that: superuser.com/questions/485105/… –  Analog File Dec 2 at 23:17

SuperDuper is the best way to clone drives in OS X. You can rename the destination drive in Finder.

share|improve this answer
    
+1 SuperDuper has helped me out of a tight spot once - it's well worth the money. –  robsoft Aug 10 '09 at 19:48
    
I used CCC in the end which worked fine so didn't get the chance to try SuperDuper. But thanks for the suggestion. –  teabot Aug 11 '09 at 10:42

I prefer a cold clone if you can. Boot to the OS X install DVD, launch Disk Utility, click the old volume, then the Restore tab. Drag the old volume into the source field and the new volume into the destination field, then click Restore and Yes to erase destination volume. Double check yourself to make sure you don't get the source and destination swapped. :)

If a cold clone isn't an option, Carbon Copy CLoner is the next best thing.

share|improve this answer

You can either do the cloning prior to replacement (recommended) or after. Get a USB enclosure for the new disk £10-15 then install the operating system fresh on the new disk. The reason is to make sure you have a RECOVERY PARTITION on the new disk. Then boot the USB disk by pressing option on boot and checking it works. Then boot into the recovery partition pressing R on boot and clone the old Macintosh HD to the new Macintosh HD using Disk Utility or use Carbon Copy Cloner as mentioned above. Only then do the physical replacement.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.