Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have Windows Media Center running on Win7 RTM with a GIGABYTE GA-MA78GM-S2H motherboard. The integrated video card is an ATI Radeon HD 3200.

It's connected to a Sony Bravia KDL-46XBR4 tv via HDMI cable.

When I turn both on at the same time, I get great sound and video.

The issue is that when I leave the computer on and turn off the TV, the TV does not display the video or audio signal when I turn the TV back on.

  • The computer is set to never turn of the display.
  • I've tried different HDMI cables - I have two, a brand-name and a no-name cable.
  • I've tried different HDMI input ports - all have the same behavior.
  • I've tried cycling the TV to switch to different inputs and back, no dice
  • I've tried Ctrl+Alt+Delete - no dice.
  • I can confirm that the computer is running by connecting via remote desktop.

Only two things seem to work:

  • shutdown and startup
  • sleeping the computer and starting up.

Neither of those "solutions" work well, as I'm looking for a pure couch potato solution.

share|improve this question
    
I don't think you're going to find a 'couch potato' solution as per my answer below. –  th3dude Aug 24 '09 at 19:55
add comment

8 Answers

up vote 4 down vote accepted
+250

This problem seems to affect many people (as per search engines) with the most suspected/mentioned cause being insufficient drivers from ATI (NVIDIA apparently has updated its drivers for related issues successfully, while ATI tried that too, but some users still seem to have the same issue afterwards).

Consequently you might try to find updated drivers for your video card, but you should probably try the following workaround first to confirm the direction: several users are having success with a little program called hdmiOn. You could try this too by assigning a Windows shortcut key to run hdmiOn.exe whenever you lose the signal.

For more details and/or different solutions you may find e.g. this thread helpful (rather lengthy though), which is addressing a similar issue and resolution experiments.


Update:

With hdmiOn fortunately providing a workaround now, theDude19 seems to be spot on regarding the actual cause being loss of Extended display identification data (EDID), as hdmiOn.exe is exactly enforcing a resend of EDID by simply turning the monitor off and on again.

Given the simplicity of this fix one would indeed think this to be the responsibility of the video driver, however, as usual, the handshake between the involved hard- and software entities might be insufficient on all sides...

share|improve this answer
    
looks promising - will try it tonight. –  Scott Weinstein Aug 24 '09 at 19:41
    
HdmiOn - worked like a charm. And so simple! –  Scott Weinstein Aug 25 '09 at 12:21
    
Excellent - indeed amazing what 3 lines of code can achieve once in a while :) –  Steffen Opel Aug 25 '09 at 18:22
    
Thanks for the mention. –  th3dude Aug 25 '09 at 19:16
    
HDMIon is the best software solution. A better solution is to get a new video card. Nvida based cards don't seem to have the same problem –  Scott Weinstein Mar 17 '12 at 0:12
add comment

Looks like the EDID is the problem. When you turn your TV off, the EDID of your computer video source is lost (since it is in memory in the TV).

According to wikipedia:

Extended display identification data (EDID) is a data structure provided by a computer display to describe its capabilities to a graphics card. It is what enables a modern personal computer to know what kind of monitor is connected. EDID is defined by a standard published by the Video Electronics Standards Association (VESA). The EDID includes manufacturer name and serial number, product type, phosphor or filter type, timings supported by the display, display size, luminance data and (for digital displays only) pixel mapping data.

The EDID is often stored in the monitor in a memory device called a serial PROM (programmable read-only memory) or EEPROM (electrically erasable PROM) and is accessible via the I²C bus at address 0x50[1].

When you turn your TV off, this ID is lost and causes the 'agreement' between the PC and TV to be lost as well. There are devices that can store this ID, such as this (note: I have no experience with these devices).

share|improve this answer
    
+1 for providing a good explanation regarding the likely cause. –  Steffen Opel Aug 25 '09 at 19:36
add comment

I think you need to diagnose the problem a little more. You need to find out if media center is blanking the screen or if windows power saving is, or if it's showing the screen but the TV isn't picking up that input right away.

I'd double check the output with a display on another port, and check the sleep settings in windows power saving and media center.

I can add that I've never quite had media center sleeping and coming back with the "power" button.. I generally just let it timeout and it wakes up with the green button.

share|improve this answer
    
I've now setup the computer to never sleep, never blank the screen. I've also updated to Windows 7. Same problem. –  Scott Weinstein Aug 17 '09 at 11:53
    
I've also confirmed the problem isn't a power/blanking the screen issue, as I can create the problem by simply turning off the tv and turning it back on immediately. No time for sleep/powersave issues. –  Scott Weinstein Aug 22 '09 at 18:31
add comment

I have had a similar issue with my Apple TV. It has to do with HDMI handshaking. The TV "wakes up" but doesn't immediately notice that there is a signal. It seems to be different from device to device. I had to switch my Apple TV to component when I bought a new cable box. The cable box never has any HDMI issues.

If I'm correct, you should also see signal appearing after cycling the TV input a few times (like from HDM1 to HDMI2 to Component, etc, until you get back to your Media Center HDMI input again).

share|improve this answer
    
I've tried "cycling" - no luck –  Scott Weinstein Aug 17 '09 at 11:53
add comment

As I noted in my reply to Omar

http://superuser.com/questions/15130/my-display-is-blank-when-i-turn-on-my-hdtv-connected-to-media-center/17287#17287

Sometimes the "three finger salute" can fix this.

share|improve this answer
    
unfortunatly, not in this case –  Scott Weinstein Aug 18 '09 at 5:05
add comment

I believe it's a problem with HDMI - as far as I know, the computer doesn't output an HDMI signal, but a DVI one (which is subset of HDMI) when the TV tries to hand-shake, there's nothing there (handshaking isn't required for DVI).

Does your TV have a DVI port? If so have you tried using that?

share|improve this answer
add comment

Not a solution but a possible work around -

After you have turned the tv and back on, is it possible to unplug the HDMI cable from the tv and plug it back in?

Hopefully it will re-do the handshake :S

Again, just a idea off the top of my head as a workaround, hopefully it will work.

share|improve this answer
    
I wish! Even changing HDMI outlets doesn't work. –  Scott Weinstein Aug 24 '09 at 19:39
    
Just want to make sure as I want to make sure you understood me because I saw you typed about changing outlets earlier. After turning the TV back on, did you take out the plug and put it back in?... Now I asked again, I think I understand what you were getting at!!... Lastly, with the TV and PC on and working, can you unplug and replug it in, with it working? –  William Hilsum Aug 24 '09 at 20:43
add comment

I have the same problem. This post seems to offer the solution:

No Signal After Turning TV Off and Back On

I will try it over the weekend, but it echoes the issue raised by th3dude and provides a solution.

share|improve this answer
    
Welcome to Super User! Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference. –  Peachy Nov 9 '12 at 6:21
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.