Has anyone else gotten it to work?
Router: Netgear WNR3500v2 WAN IP: y.y.y.y Radius: off Wireless Security: Security Mode: WPA2 Enterprise WPA Algorithms: AES Radius Auth Server Address: x.x.x.x Radius Auth Server Port: 1812 Radius Auth Shared Secret: password Key Renewal Interval (in seconds): 3600 TekRadius Server: Users: test (username), User-Password (check): 1234, TLS-Server-Certificate (check) [created with TekCERT] Clients: Default (NAS), password (secret) y.y.y.y (NAS), password (secret) Settings: Service Parameters: Listen IP Address: x.x.x.x Authentication Port: 1812 PEAP Inner Auth Method: EAP-MS-CHAP-v2 Computer Trying to Authenticate: Mac: 10.6.5 Recognizes that the auth needs user/pass. I type in test and 1234, nothing happens, it asks again. Sometimes it "connects" says its authenticating, and then disconnects, and then repeats.
Hardware setup: TekRADIUS on Windows 7, plugged directly into the router. Mac, trying to wirelessly authenticate with the netgear and the radius server.
Notes: I've been running wireshark while I've been trying to connect, and applied a filter of 'radius', and no packets have shown up.
In the TekRADIUS log, it shows nothing except when the server starts and stops, and these messages:
12/7/2010 5:06:34 AM - IP address configuration change has been detected
Which is weird, cause the IPs aren't changing.