Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I'm busy upgrading the hard drive on a system with a Gigabyte GA-GC230D motherboard with an Atom CPU.

I am swapping out a 120GB SATA drive with a 500GB SATA drive. Both notebook form factor. Both known good. For some reason the BIOS recognises the 120GB drive but will not recognise the 500GB drive.

I just can't think of a reason why it wouldn't. The new drive is a Hitachi 7K500.

share|improve this question
    
Sometimes its just a compatibility issue, another brand may work, did you update the bios on the motherboard? –  Moab Dec 20 '10 at 11:07
    
One reason can be SATA1/SATA2 negotiation. I'm not sure of specifics, but a motherboard SATA connector whose SATA controller knows only SATA1, will not be able to communicate with a SATA2 hard disk(unless the SATA2 hard disk is jumpered to act like SATA1). I am not sure if it's just a motherboard issue in that situation. And I don't knwo if all SATA2 HDDs have that option. –  barlop Dec 20 '10 at 11:42
    
There is a flaw in the subject you gave your question. Your question may not be SATA specific. –  barlop Dec 20 '10 at 12:17
add comment

1 Answer

up vote 0 down vote accepted
  • Try to update motherboard BIOS to the latest version.
  • Try another SATA cable.
share|improve this answer
    
It was the cable. Thanks for the suggestion. –  tomfanning Dec 31 '10 at 16:18
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.