Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux.

When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk.

If I look at cat /proc/scsi/sg/device_strs I get

ATA             Hitachi HTS54321        FB2O
HL-DT-ST        DVDRAM GSA-T50N         RP05
Seagate         Desktop                 0130
Corsair         CSSD-R60GB2

So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result.

A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata).

Added: I did try to mount /dev/sg3 but mount say that its not a block device. (File say Its a character special device).

Added output from dmesg:

[   97.454073] usb 7-1: USB disconnect, address 2
[  105.913055] hub 2-0:1.0: unable to enumerate USB device on port 3
[  107.048054] usb 2-3: new high speed USB device using ehci_hcd and address 5
[  107.162900] usb 2-3: New USB device found, idVendor=1b1c, idProduct=1ab8
[  107.162903] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[  107.162906] usb 2-3: Product: CSSD-R60GB2
[  107.162908] usb 2-3: Manufacturer: Corsair
[  107.162910] usb 2-3: SerialNumber: 10111441000000990069
[  107.167651] scsi7 : usb-storage 2-3:1.0
[  108.195543] scsi 7:0:0:0: Direct-Access     Corsair  CSSD-R60GB2           PQ: 1 ANSI: 0
[  108.197732] scsi 7:0:0:0: Attached scsi generic sg3 type 0

sg_map gives me

/dev/sg0  /dev/sda
/dev/sg1  /dev/scd0
/dev/sg2  /dev/sdb
/dev/sg3

and lsscsi gives me

[0:0:0:0]    disk    ATA      Hitachi HTS54321 FB2O  /dev/sda 
[1:0:0:0]    cd/dvd  HL-DT-ST DVDRAM GSA-T50N  RP05  /dev/sr0 
[6:0:0:0]    disk    Seagate  Desktop          0130  /dev/sdb 
[8:0:0:0]    disk    Corsair  CSSD-R60GB2            -       

And lsscsi -l gives

[0:0:0:0]    disk    ATA      Hitachi HTS54321 FB2O  /dev/sda 
  state=running queue_depth=31 scsi_level=6 type=0 device_blocked=0 timeout=30
[1:0:0:0]    cd/dvd  HL-DT-ST DVDRAM GSA-T50N  RP05  /dev/sr0 
  state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30
[6:0:0:0]    disk    Seagate  Desktop          0130  /dev/sdb 
  state=running queue_depth=1 scsi_level=3 type=0 device_blocked=0 timeout=30
[8:0:0:0]    disk    Corsair  CSSD-R60GB2            -       
  state=running queue_depth=1 scsi_level=0 type=0 device_blocked=0 timeout=0

Come to think of it scsi_level=0 looks wrong.

And lsscsi -t gives

[

0:0:0:0]    disk    sata:                           /dev/sda 
[1:0:0:0]    cd/dvd  sata:                           /dev/sr0 
[6:0:0:0]    disk    usb: 2-1:1.0                    /dev/sdb 
[8:0:0:0]    disk    usb: 2-3:1.0                    -

I found an other guy with exactly the same problem (http://forum.corsair.com/v3/showthread.php?t=91434) so I think its beginning to look like a bug in the drives firmware or in the linux kernel.

Final update: Corsair have said that the disk design is broken and there does not seem to be any way to make it work.

But thanks for the help anyway.

share|improve this question
    
The title it's usB right? –  Trufa Dec 24 '10 at 13:24
    
Right. I just fixed it :} –  MTilsted Dec 24 '10 at 13:29

3 Answers 3

This may mean the device is handled by a different driver. Have you tried mounting it?

sudo mount /dev/sg3 /mnt

Edit: The sg3 device might be a scsi device which still needs to be mapped. Give this a try.

share|improve this answer
    
Yes but that failed. (Se added:) –  MTilsted Dec 24 '10 at 12:03
    
Can you also post the output of 'dmesg' after you've attached the disk? –  Kristof Provost Dec 24 '10 at 12:05
    
sg_map don't show any mapping. Is there an utility where I can create a map? (Also see update with output from lsscsi and sg_map) –  MTilsted Dec 24 '10 at 14:24

I presume the MBR of the disk is corrupted. If you overwrite the MBR of the disk, it will probably work again.

You have to do that as root:

dd if=/dev/zero of=/dev/sg3 bs=446 count=1

Be very prudent with this command, because you can destroy a good working hard disk. Be sure that the hard disk you want to repair is indeed the /dev/sg3!

I had the same problem this morning, and I managed to "repair" it in this way. No data was lost on the hard disk by doing this intervention.

share|improve this answer

SATA SSD drive in a 2.5 form factor with a built-in USB port. Weird.

All I know is that even a disk device with no MBR will show up as /dev/sda - without a valid partition table, you won't see /dev/sda1, etc. but the root /dev/sda device will certainly be there.

Try updating the firmware on it.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.