Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected?

I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V)

I bought a all-in-one Modex-to-SATA power adapter and SATA cable and I still don't know what to do.

I have read various forums and a lot of people are stating that it's perfectly ok, but some are scaring me that by connecting it so, it fried their hard disk. And some also mentioned cutting the yellow 12V wire if I'm planning to use Modex-to-SATA power.

Thanks in advance

share|improve this question

migrated from serverfault.com Dec 28 '10 at 13:48

This question came from our site for professional system and network administrators.

4  
Cutting power wires in a computer is a BAD IDEA™ –  Chris S Dec 28 '10 at 13:48

5 Answers 5

up vote 6 down vote accepted

According to the standard, SATA data/power connectors are universal and there is no risk of damage if you connect a 2,5" disk to a desktop system. If have done so countless times and never had a problem. If guess if poeple had problems, they might have had other issues with their setup.

share|improve this answer
    
Yes I have thought of that too, but still bothers me that 5V/12V thing. How does the laptop disk "ignores" those 12V? –  Lawliet Dec 28 '10 at 11:44
4  
@Lawliet: It 'ignores' the 12V because it's on a different pin that isn't connected to anything on the drive. –  Iain Dec 28 '10 at 13:25

You can connect 2,5" laptop-Sata-HDDs without any risk directly into your desktop-PC - no need for any workaround using USB which will slow down the transfer.

SATA is SATA and all SATAs are compatible (at least for now - though i doubt they'll change that...)

In fact, some servers use 2,5" drives to save space...

tsg

share|improve this answer
1  
2.5" server drives are often SAS, and moreover thicker than SATAs. –  petrus Dec 28 '10 at 12:12
    
In addition to most 2.5" server drives being SAS, they're smaller because they perform better; the space savings is ancillary. –  Chris S Dec 28 '10 at 13:47

I recommend to use a USB external adapter for 2.5 HD.

But you can contact the HD manufacturer and ask to them, don't just take the risk yourself.

share|improve this answer
1  
Why use USB? That's stupid. –  Mircea Chirea Dec 28 '10 at 11:29
1  
@iconiK: Why is it stupid? USB is a valid way to connect the drive to a desktop PC. Maybe it's not the way you would do it, but it's not stupid. Also, calling someone's answer stupid is not the way to ingratiate yourself to the members here. –  joeqwerty Dec 28 '10 at 12:43
    
@joeqwerty: thx a lot, iconiK it's right for the performance loss, but I've advised it to avoid any hw failure, the answer of SwenW seems anyway the good one :-) –  tmow Dec 28 '10 at 12:55
1  
@joeqwerty, it's stupid as you lose a lot of the transfer speed the drive can do for no good reason; even with USB 3 there is 10% or more loss. USB is stupid for a hard-drive, especially when there's a perfectly good SATA port available. –  Mircea Chirea Dec 28 '10 at 13:30
1  
@Lawliet, how is it safer? SATA is standardized, including the data and power connectors, there is no danger involved even with 1.8" drives in a desktop (though the connectors are slimmer on these and you need an adapter). –  Mircea Chirea Dec 28 '10 at 13:31

If this is a temporary need, I'd recommend an external USB drive adapter.

Something like this universal drive adapter would work well.

share|improve this answer

UPDATE: Thank you for your answers folks.

Anyway, I decided I just remove the yellow wire from the Modex-to-SATA cable and connect the hard disk to my PC. I closed my eyes as I pressed the button. Works like a charm. I am transferring data now. Lot and lot faster than via Ethernet

Best regards

share|improve this answer
3  
You don't need to remove the yellow wire, if a drive doesn't need 12V it won't have the 12V line connected to anything. –  Mircea Chirea Dec 28 '10 at 13:33
3  
Cutting wires in computer is a BAD IDEA™! It was made with the wire because it works that way; you're taking a serious risk of destroying something by changing how it is supposed to work. –  Chris S Dec 28 '10 at 13:45
5  
So you ignored the answers of people who obviously know what they're talking about and reduced the functionality of your device? Way to go! –  Joe Taylor Mar 9 '12 at 10:36

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.