Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I know there a lot of posts about ram but I'm still confused about it. I'm building a new system and because it was cheaper, I bought a 6GB kit from Corsair. So I'm wondering if I would be better off just using 4GB of it in a dual channel configuration or just add all 6GB (3 DIMMS) in a single channel configuration.

Thanks

share|improve this question
    
Thanks everyone –  JimDel Jan 6 '11 at 18:49
add comment

3 Answers

up vote 5 down vote accepted

One thing to consider is the Operating System. Are you using a 64-bit operating system that will recognize greater than 4GB of memory? If not, just stick with the 4GB in dual-channel mode.

Also, if you are going to be running some very memory/harddrive intense programs (Such as running a database), I would go with the 6GB configuration (Assuming your OS is 64-bit).

If you plan on gaming with the machine, I would go with the 4GB in dual-channel mode primarily because games rarely take advantage of any memory greater than 4GB. Once you hit the 4GB mark on memory, speed is the factor.

-Brandon

share|improve this answer
add comment

This greatly depends on your use. If you never plan to have massive applications open or many large applications the Dual Channel is far better. But if your going to hit the top of that 4GB limit you should stick with the greater capacity.

Most of your limit is not going to come from RAM anyway. Typically its HDD speed that slows RAM loading UNLESS your are planning on using programs with a lot of calculations.

Summery:
Big programs more Ram=better
Fewer small programs or high calculation programs: faster RAM=better.

share|improve this answer
add comment

I'd recommend that you experiment with both.

Some motherboards use triple channel configuration and some can use dual channel for some modules and let other modules work outside dual channel, so there won't be any performance difference.

Another option which you may consider is to buy 2 more GiBs of RAM and use 8 GiB in dual channel mode. This way, yoo won't have to upgrade RAM for some time. Also RAM modules which are part of kits are often available for separate purchase, so you probably won't have any compatibility problems.

share|improve this answer
    
I bought 2GB more than I needed for my wife's computer just so I could take advantage of triple-channel mode. It was worth it. Dual-channel feels pretty slow in comparison! –  Brian Knoblauch Jan 6 '11 at 20:16
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.