I overclocked my 5850 to 775/1250 (using AMD Overdrive) for maybe an hour. I don't think the temperature rose above the low 80's (Celsius, of course), but I started seeing artifacts so I put it back to the stock 725/1000. However, I'm still seeing the occasional artifact. Is it possible that I damaged something? I'm running the latest drivers (10.12).
Tell me more
×
Super User is a question and answer site for
computer enthusiasts and power users. It's 100% free, no registration required.
|
|
||||
|
|
Possible, best would be to run couple of rounds of 3D Mark'06 / FurMark to check for artifacts and temperatures. You should also try rebooting after setting the clocks back to defaults |
|||||||||
|
|
Damaging electronics is always a possibility, but I have found that they are surprisingly resilient and usually can resume normal operation when returned to their rated environments and operating limits. Indeed, most likely your problem was simply due to overheating and by returning it to normal speeds, the artifacts would go away. I don’t know much about 3D Mark (especially if you have to visually watch for artifacts), but I would recommend ATITool and ATI Tray Tools. Both allow fine-grained control for overclocking, detailed tweaking of countless software settings, temperature monitoring, plus many more features, most importantly—for this question—is their automatic artifact detection and auto-overclocking functions. Plus, both provide direct access to the devs through their forums, allowing you to quickly and easily get support and even influence future versions. |
|||
|
|
