Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

When I try connecting to my wireless network it attempts to connect then gives up.

There's something strange going on with the mac's. The eternet switch and all the vlan interfaces have a mac 00:FF:FF:FF:FF:FF.

config 'switch' 'eth0'
        option 'vlan0' '2 3 4 8*'
        option 'vlan1' '0 8'
        option 'vlan2' '1 8'

config 'interface' 'loopback'
        option 'ifname' 'lo'
        option 'proto' 'static'
        option 'ipaddr' '127.0.0.1'
        option 'netmask' '255.0.0.0'

config 'interface' 'lan'
        option 'type' 'bridge'
        option 'ifname' 'eth0.1'
        option 'proto' 'static'
        option 'netmask' '255.255.255.0'
        option 'ipaddr' '192.168.2.1'
        option 'ip6addr' ''
        option 'gateway' '192.168.1.253'
        option 'ip6gw' ''
        option 'dns' ''

config 'interface' 'wan'                    
        option 'ifname' 'eth0'              
        option 'proto' 'dhcp'               
        option 'ipaddr' '192.168.1.8'       
        option 'ip6addr' ''                 
        option 'netmask' '255.255.255.0'    
        option 'gateway' '192.168.1.253'    
        option 'ip6gw' ''                   
        option 'dns' '192.168.1.253'        

config 'interface' 'dmz'                    
       option 'ifname' 'eth0.2'             
       option 'proto' 'static'              
       option 'ipaddr' '192.168.0.1'        
       option 'netmask' '255.255.255.0'     

Any help on this will be greatly appreciated! When I try setting the mac using macaddr it does nothing. It works perfectly fine when I turn the authentication off. I've also discovered that when wpa2 is switched on I don't receive a association reply from ap.

thats my hostapd.conf

interface=eth1
driver=broadcom
bridge=br-lan
ssid=O2BB3
wpa=2
wpa_passphrase=prettywoman
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP

Btw that password is only temporary while am testing.

share|improve this question

1 Answer 1

Fixed this using dd-wrt. At the time of this posting it's nesscessary to manually configure the vlans using nvram because the web interface gui doesn't actually do anything. It's just a place holder hence there's no code attached

share|improve this answer
    
I'd be really interested in knowing whether one can get VLANs working on the WNR3500L using Tomato in the same way, as there seems to be support in the kernel. –  paradroid Jan 10 '11 at 22:59

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.